您要查找的是不是:
- Effect of CeO2 on microstructure and sliding wear properties of Cr2O3 ceramic coating with plamsa spraying method[J].Journal of the University of Petroleum,China,2002,26(5):65-67. CeO2对等离子喷涂Cr2O3涂层组织和滑动磨损性能的影响[J].;石油大学学报;2002;26(5):65-67
- sliding wear properties 滑动磨损性能
- Study on Microstructure and Dry Sliding Wear Property of Casting Penetration Composite Layer with Vanadium and Chromium on the surface of Cast Steel 铸钢表面钒铬铸渗层组织及干滑动磨损性能研究
- The effects ofload and sliding velocity on the wear properties of the composites were discussed and the wear mechanisms were also inves-tigated. 滑动速度对复合材料的摩擦因数影响较小,但对磨损率影响较大。
- The effects of mould temperature,reheating temperature and reheating duration on sliding wear and friction properties of thixoformed AZ91D alloy were investigated. 研究了模具温度、锭料加热温度和加热时间对触变成形AZ91D镁合金滑动摩擦磨损性能的影响。
- The friction and wear properties of polytetrafluoroethylene(PTFE)reinforced with PTW at different PTW content, temperature, load and sliding speed were investigated. 考察了PTW含量、摩擦温度、载荷和滑行速度对其影响。
- The friction and wear properties of polytetrafluoroethylene (PTFE) reinforced with PTW at different PTW content, temperature, load and sliding speed were investigated. 考察了PTW含量、摩擦温度、载荷和滑行速度对其影响。结果表明,PTW-PTFE的磨损量仅是纯PTFE的1/10;
- Improved dimensional stability. Good wear properties. 提高尺寸稳定性。良好的耐磨性。
- dry sliding wear property 干滑动磨损
- Measuring Wear Properties of Fluid Lubricants (Falex Method), Method for (05. 液体润滑剂的耐磨损性的测量方法(润滑剂的耐热耐压法)(05。
- The friction and wear properties of the sintered samples were analyzed. 对烧结后的样品进行了摩擦磨损性能研究。
- Its subject coverage includes: effect of nitriding on tribology, frictional wear, adherence of coatings, and sliding wear, etc. 它的主题涉及的范围包括 :电沉积,化学蒸汽淀积,真空金属涂层,硬镀铬物镀层;
- Standard Test Method for Ranking Resistance of Plastics to Sliding Wear in Block-on-Ring Wear Test (Cumulative Wear Method) Using Micro-Tribometer mod. 标准试验方法排行抗性塑料滑动磨损块上环磨损试验(累积磨损法)利用微摩擦国防部。
- Standard Test Method for Ranking Resistance of Materials to Sliding Wear in Block-on-Ring Wear Test Using Micro-Tribometer mod. 标准试验方法排行电阻材料的滑动磨损块上环磨损试验用微摩擦国防部。
- The mechanism of reciprocating sliding wear for TiAlN was the combination of abrasive wear, oxidation wear and delamination. 涂层的往复滑动磨损表现为磨粒磨损、剥层和氧化磨损的共同作用的机制。
- The dry sliding wear characteristics of the coating electrospark-deposited on 45 steel with Cr anode was studied with a ring-on-block tester. 用环块磨损试验机对铬电极电火花放电熔涂层的干摩擦滑动磨损特性进行了研究。
- The mechanics,friction and wear properties of graphite/MoS_2 filled Ekonol/PTFE composites were studied. 采用石墨/二硫化钼填充改性聚苯酯/聚四氟乙烯复合材料,研究了复合材料的力学性能和摩擦磨损性能。
- The frictional and wear characteristics of conventionally heat treated and laser surface hardened high speed steels under sliding wear condition are studied. 研究了常规处理的高速钢和激光表面硬化的高速钢在滑动磨损条件下的摩擦磨损特性曲线。
- The sliding wear characteristics under boundary lubrication of the coating electrospark-deposited on 45 steel with Cr anode was studied with a ring-on-block tester. 用环块磨损试验机对铬电极电火花熔涂层及淬火低温回火态45%23钢的边界润滑滑动磨损特性进行了研究。
- The content of graphite, load and sliding speed that influenced the dry sliding wear and friction of bronze-graphite thermal spraying coatings were studied. 研究了石墨含量和载荷等对青铜-石墨复合粉末热喷涂自润滑涂层干滑动摩擦磨损性能的影响。