您要查找的是不是:
- slurry spin coating method 浆料旋涂法
- In this thesis, a simple and effective slurry spin coating approach (as a patent applied by us) was developed for fabricating Sm0.2Ce0.8O1.9 (SDC) films for anode-supported solid oxide fuel cells. 本论文应用我们发明的简单;高效的浆料旋涂制膜方法;制备阳极支撑的固体氧化物燃料电池Sm0.;2Ce0
- Takashi O., Luis B.M., Ferry I., Kikuo O.,“Fabrication of a large area monolayer of silica particles on a sapphire substrate by a spin coating method”, Colloids and Surfaces A, Physicochem.Eng. 王惠君,“以回应曲面法探讨溶胶-凝胶法制备奈米二氧化矽之参数影响”,中原大学化学工程学系,2004。
- slurry spin coating 浆料旋涂
- slurry spin coating technique 浆料旋涂法
- Coating method:Rubber roll coating method. 涂布方式:胶辊涂布方式。
- The spin coating is followed by a baking step to remove the solvent and, in some cases, to complete the polymerization. 接著以烘烤除去溶剂,有时候可以顺便完成聚合反应。
- TiO_2 nano thin film was prepared on ITO glass substrate by dip coating and spin coating process. 以TiCl_4和C_(16)H_(36)O_4Ti溶胶为前驱体,分别采用旋转-涂覆法和浸渍-提拉法制备了纳米TiO_2薄膜。
- We prepared two kinds of OLED devices by spin coating, which have three-layer structures[a:ITO/MEH-PPV/Al] and [b: ITO/MEH-PPV/Ca:Al]. 我们利用MEH-PPV为发光材料制备了两种结构电致发光器件:a.;ITO/MEH-PPV/Al和b
- The chemical is widely used in the production of LSI,VLSI and other semiconductors to remove photoresist edge bead that occurs during typical spin coat wafer processing. 该试剂用于清除匀胶后残留于硅片边缘及背面的光刻胶,已经广泛应用于中、大规模集成电路及其它半导体器件的生产。
- Dip coating: Coating method in which the web is passed around a roller immersed in solution. 浸渍涂布:纸卷绕过一浸于涂面溶液的轴而加上涂层的方法。
- PSf/PEO-AgBF_4/SR asymmetric hollow fiber membranes were prepared using double coating method. 用“二次涂层”方法制备了涂层含银离子的PSf/PEO-AgBF_4/SR非对称中空纤维复合膜。
- The TiO_2 nano thin film prepared by spin coating process is white, while the TiO_2 nano thin film made by dip coating process is colorless and transparent. 以TICl_4为通过旋转.;涂覆法制备的纳米TiO_2薄膜;表观为白色不透明膜;而以C_(16)H_(36)O_4Ti为前驱体选用浸渍-提拉法制备的薄膜为无色透明膜。
- ZnO film got by spin coating as the electron transport layer, MEH-PPV as the hole transport layer, a new structure of electroluminescence device was fabricated. 并且对此结构的双层器件进行了不同颗粒尺寸的ZnO纳米颗粒薄膜的对比研究。;
- Compared with traditional coating, this coating method will not result in phenomena like over-coating or coating rebound, so paint loss is cut down. 与传统式空气喷涂方法相比,级减少喷涂过量及反弹现象,从而减少涂料损失。
- Blade coating Paper coating method where a surplus of coating is applied to the web and then levelled and controlled by a flexible steel blade. 刮刀涂布一种涂布方法。把大量的涂剂放于纸卷上面,然后把多余的涂剂用软性刮刀刮去,同时平滑涂层表面。
- Brush coating Method of coating a web of paper where the coating mix is distributed by a set of stationary and oscillating brushes. 手刷涂布在纸捲上加上涂层的方法。用一套固定和摆动毛刷把涂剂均匀的分佈。
- Blade coating: Paper coating method where a surplus of coating is applied to the web and then leveled and controlled by a flexible steel blade. 刮刀涂布:一种涂布方法。把大量的涂剂放于纸卷上面,然后把多余的涂剂用软性刮刀刮去,同时平滑涂层表面。
- In this thesis, we provide a new .fabrication: using nanoparticles to fabricate erbium doped luminescence thin film.We mix nanoparticles and use spin coating process to deposit it on a silicon wafer. 这篇论文提出新的制程方法:使用奈米粒子制作掺铒发光薄膜,利用奈米粒子混合旋布玻璃并旋涂于矽基板上。
- Method: Using microcrystalline cellulose and sodium starch carboxy methyl as the important adjuvant, wet granulation and tableting, Rolling coating method for coating. 方法:以微晶纤维素、羧甲基淀粉钠等为主要辅料,以湿法制粒压片,用滚转包衣法包衣。