您要查找的是不是：
- vanadium-based solid solution alloy 钒基固溶体合金
- Study on Structure and Electrochemical Performance of Ti-V-Cr-Ni Solid Solution Alloy Ti-V-Cr-Ni固溶体结构和电化学性能研究
- solid solution alloy 固溶体合金,固溶合金
- V-based solid solution alloy 钒基固溶体合金
- Morphology transformation of eutectic silicon in Al-Si alloy during solid solution was observed by OM and SEM. 通过金相和扫描电镜观察研究了铸造铝硅合金中的共晶硅在固溶热处理过程中的形态变化。
- The Crystallography, Magnetic, Magnetocaloric Properties and Strengthing of Gd-based Solid Solution Alloys Gd基合金晶体学、磁学、磁热性能及固溶强化的研究
- A solid solution of iron and up to 1 percent of carbon, the chief constituent of hardened carbon tool steels. 马氏本，马登斯体一种由铁和高达百分之一的碳组成的溶液，是硬化碳工具钢的主要成分。
- The results reveal that the solid solution and aging treatments will lead to a change in both cyclic stress response and cyclic stress-stain behavior of the extruded AM50 alloy. 在高的外加总应变幅下,固溶和时效处理可以提高挤压变形AM50镁合金的疲劳寿命,但当外加总应变幅较低时,固溶和时效处理则降低挤压变形AM50镁合金的疲劳寿命;
- The wear resistance is 1.27 times of a commercial flux-cored with same alloy system and same hardness. 耐磨性为某硬度基本相同的高铬铸铁药芯焊丝耐磨性的1.;27倍。
- After some adjustments,adaptable drug residue system and alloy system have been selected and assured. 通过反复调整,确定了合适的药皮渣系及适合热锻模的合金系。
- The Microstructure of Ni solid solution in Au-Ni-Fe-Cr-In-Zr alloy has been characterized by transmission electron microscopy (TEM) combined with quantitative X-ray microanalysis (EDS). 本文运用TEM.;EDS等微观分析手段对Au基六元合金中的Ni固溶体进行了研究。
- But addition of 0.15% Sc can not restrain recrystallization in the process of solid solution treatment,and addition 0.25% Sc can increase recrystallization in the process of solid solution treatment,reduce the strength of the alloy. 添加0.;15%25Sc和0
- The effects of over-aging temperature on solid solution recrystallization and mechanical properties of 2024 aluminum alloy were studied by means of mechanical tensile test,TEM observations. 采用力学性能检测和透射电镜(TEM)观察,研究了过时效温度对2024铝合金形变后的再结晶行为和合金力学性能的影响。
- Thermodynamic calculation and evaluation for Sn-Ag-Cu-Ce lead-free solder alloy system were carried out by means of Chou model. 利用周模型对Sn-Ag-Cu-Ce无铅钎料合金体系进行了热力学计算预测。
- It is shown that the mechanical properties of annealed sample of 2224 aluminum alloy are improved by the combination of solid solution and aging treatment after ECAP,the size of grain is refined. 结果表明,退火态2224铝合金经ECAP挤压后,进行固溶和时效处理,明显提高了合金的力学性能,细化了合金的晶粒。
- But the constitution of the alloy system affects the compatibility, structure and performance of PSU/PES-C alloy membrane. 采用钛合金膜超滤中试系统对谷氨酸发酵液进行了除菌体试验研究。
- Electronic structure, phase diagrams, thermodynmics and surface properties of Pd-Y alloy and its hydrogen solid solution are studied by ab initio calculation and statistics physics. 应用从头计算方法和统计模型研究钯钇合金及其含氢固溶体的电子结构、相结构、热力学、动力学与表面性质。
- It can be found that most of the joints were combined excellently, with no obvious brazing disfigurement, and a transitional zone of solid solution between the filler alloy and hard alloy was created. 结合电子探针元素扫描图，我们对焊缝内夹渣和气孔的生成原因及其影响因素进行了探讨，并提出了初步解决方案。
- The 500 MPa grade dual phase steels were piloted based on C-Si-Mn alloy system in laboratory,its microstructure and mechanical properties were analyzed. 在实验室试制了500 MPa级C-Si-Mn系冷轧双相钢,进行了力学性能测定和显微组织分析。
- solid solution alloys 固溶体合金
