您要查找的是不是：
- This paper introduces the way of solid lubricants bearings used in space manipulator joints, and the improved performances of solid lubricants film are analyzed. 摘要介绍了空间机械臂关节轴承的固体润滑方式，分析了跑合对固体润滑膜润滑性能的改善作用。
- Solid lubricant film can be formed in deposits containing PTFE (with electroless or electrodeposition processes).It features good lubricity, less friction coefficient, nonadhesion and easy stripping. 含有PTFE微粒的镀层（无电解镀、电沉积）可形成固体润滑膜，具有润滑性好、摩擦系数小、不粘着、易脱模等特性。
- solid lubricating film 固体润滑膜
- Study of Tribological Characteristics of Bonded Solid Lubricant Film 粘结固体润滑膜的摩擦学特性研究
- Mechanisms of the Molybdenum Disulfide Solid Lubricant Film in Lubrication and its Applications 二硫化钼基润滑涂层在润滑油中的作用机理及实际应用
- A Study on the Performance of PF-1 Solid Lubrication Film as Oil-Compatible Precoating Film PF-1粘结固体润滑膜作为耐油预涂膜的性能考察
- Development of Research on the Layered Solid Lubrication Films 层状固体润滑薄膜的研究进展
- Comparison of Performance of Hybrid Ceramic Ball Bearing and All-Steel Bearing Coated with Polytetrafluoroethylene Solid Lubricant Film 表面涂敷聚四氟乙烯固体润滑薄膜的混合式陶瓷球轴承与全钢轴承性能对比分析
- KHONSARI M M,WANG S H.Notes on transient thd effects in a lubricating film[J].ALSE Trans,1992,35(1):177-183. 中华人民共和国机械工业部.;汽轮机径向滑动轴承性能计算[M]
- Nanometer WS2 crystal is a solid lubricating material with high applied value, wide use and excellent performance. 纳米WS2晶体是一种很有实用价值、应用广泛、性能优良的固体润滑新材料。
- There was no a lubricating film on the rear face of the ATF tool,where existed a obvious wear feature. 自润滑刀具后刀面不存在固体润滑膜,具有较明显的磨料磨损特征。
- An elastohydrodynamic lubricating film thickness measuring system, based on multi-beam interferometry, has been introduced in this paper. 摘要介绍了1种基于多光束干涉强度的弹流油膜厚度测量系统，包括其测量原理和测量系统的设计与组成。
- The state of bonded solid lubricating coatings, the coating technique, the performance and the application are briefly reie-wed. Recent research tendency is also given. 本文对固体润滑粘结涂层的概况、涂敷方法、性能及应用作了简明的介绍,并对涂层的最近动向提出了看法。
- No transfer layer but the very thin and even lubricating film could be found in case the steel ring surface sliding with POM/M-UHMWPE(95/5) and POM/LLDPE/EAA(90/10/4) blends. 与POM/M-UHMWPE(95/5)和POM/LLDPE/EAA(90/10/4)共混物对磨时，钢环表面并未出现明显的转移膜，而是一层薄而均匀的润滑层。
- The smooth and dense lubricating film was formed on the surface of the sample with high graphitization degree, which resulted in the decreasement of the wear rate. 石墨化度较高试样的表面能够形成一层光滑、致密的润滑膜，从而降低其磨损率；
- solid lubricate film 固体润滑薄膜
- This product base on alloy of broze of special formula.The solid lubricating medium is inlaid in the friction surface and the friction area of the solid lubricating medium take over 20%. 该产品是高强度合金铜为基体，镶嵌特殊配方的固体润滑剂，固体润滑剂摩擦面积超过30%25。
- solid lubricant film 固态润滑膜
- bonded solid lubricant film 粘结固体润滑膜
- The carbon fiber can make the contact performance of brush sliding system better and lead to smaller commutation sparks and keep the lubricating film of the engine system in good condition. 炭纤维的加入能使电刷滑动系统接触性能变好，从而有效减小电刷换向火花，并促使电机系统的润滑膜保持完好的状态。
