您要查找的是不是：
- transient liquid phase bonding process 瞬时液相扩散
- transient liquide phase bonding process 瞬间液相焊
- Keywords discontinuously reinforced Al MMCs;solid phase bonding;reinforcement; 非连续增强铝基复合材料;固相焊接;增强相;
- Solid phase bonding of discontinuously reinforced alumninum based metal matrix composites 非连续增强铝基复合材料固相焊接研究现状
- Keywords bimetal composite;solid phase bonding;hydrostatic extrusion;numerical simulation; 双金属复合材料;固相结合;静液挤压;数值仿真;
- Characteristics of Isothermal Solidification Stage and Analytical Solutions for The Stage in Transient Liquid Phase Bonding Process 液相扩散焊等温凝固阶段的特征及解析解
- solid phase bonding 固态焊接
- Are the ambient conditions controlled for the bonding process? 周围是情况吗受约束的为会接程序?
- A solid or solid phase separated from a solution. 沉淀物从溶液中分离出来的固体或固体状态
- The esterification process of Fmoc-Asn(Trt)-OH and Wang resin was studied by solid phase synthesis. 研究了Fmoc-Asn(Trt)-OH与Wang树脂的酯化反应工艺。
- The reaction process of preparation, laundering, solid phase ion-exchange and calcining was introduced. 介绍了该反应的制备、水洗、固相离子交换-水解耦合和烯烧过程。
- The goal of the granulation process is to reproducibly achieve the same degree of surface coverage of the solid phase with the liquid phase. 该制粒工艺旨在利用液相重复获得统一的固相表面覆盖水平。
- Section 13. 3 covers the thermocompression bonding process itself and also tape automated bonding. 13.;3节的内容既涉及热压连接工艺本身;也涉及了自动连接的传送带技术。
- In this paper, research results and disadvantages of main bonding process of zircaloy and stainless steel are reviewed. 分析了核反应堆用锆合金与不锈钢主要连接技术的研究结果及存在的问题。
- Most common substances exist in the solid phase at low temperatures. 大多数一般物质在低温下处于固态。
- Section 13. 3 covers the thermocompression bonding process itself and also tape automated bonding . 3节的内容既涉及热压连接工艺本身，也涉及了自动连接的传送带技术。
- For a pure liquid or solid phase, X, the activity is defined as unity. 对于纯液相或纯固相，X，其活度为1。
- The results also show that there are two bonding mechanisms in the bonding process. 同时研究还表明:在轧制复合过程中存在着两种结合机理。
- Matthew: Brushing is a actually obviously been epical for him and it's a bonding, part of the bonding process. 马修：很显然，这种梳理对它大有裨益，同时也是我们建立良好关系的一部分。
- The research progress of interlayer used for brazing,diffusion bonding and partial transient liquid phase bonding(PTLPB) of metals and ceramics was discussed. 概述了金属与陶瓷钎焊、扩散焊与部分瞬时液相连接采用的中间层(又称过渡层)的研究现状。
