您要查找的是不是:
- The temperature variations of several points on the outside of welded joint are measured by using thermocouples which are spot welded on the surface of the workpiece. 使用热电偶点焊到工件表面的方法对接头部分若干点的温度变化进行了实时测量,并与计算结果进行了对比。
- Method of fatigue testing for spot welded joint 点焊疲劳测试方法
- Method of tension shear test for spot welded joint 点焊接剪切试验方法
- Method of tension test for spot welded joint 点焊接张力切断试验方法
- spot weld joint 点焊接头
- Method of macro test for section of spot welded joint 点焊接断面试验方法
- Ultrasonic fast identification for faulty welded joint defects of auto-body spot welding 车身点焊接头虚焊缺陷的超声快速识别
- Test method for shear tensile fatigue of spot welded joints 点焊接头剪切拉伸疲劳试验方法
- An engineering calculation method of spot weld fatigue life prediction is introduced. 摘要介绍一种焊点疲劳寿命预测的工程计算方法。
- And the draws of the stress, the whole life and the spot weld life of the crossmember are got after the analysis. 应用有限元分析法对副车架的疲劳台架试验进行强度和疲劳分析,得到副车架的应力分布图、副车架本体寿命云图和焊点寿命云图。
- The distribution of residual stress of weld joints is analyzed. 并分析了焊接接头残余应力的分布规律。
- Microporosity in thermite weld joint consiste of blow hole and shrinkage cavities. 氧或硅含量过高形成氧化物或硅酸盐;
- In this estimator, the ANN is to realize the mapping characteristics from dynamic resistance to spot weld mecnanical proterty. 在此估测器中,经训练的神经元网络将用于描述动态电阻曲线与焊点力学性能的映射关系。
- Mainly used in coating the weld joint of buried steel pipeline and insulated pipeline. 主要用于埋地钢质管道现场焊接补口和保温管线现场补口;
- Strength of resistance spot weld is determined by the physical attributes of weldment including material and geometric issues. 电阻点焊接头的焊接强度由母材和熔核的材料属性及几何特征决定。
- The corrosion behavior of austenite stainless steel weld joint in the different acidic medium was studied. 研究了奥氏体不锈钢焊接接头在不同酸性介质中的腐蚀行为。
- The element selection,gridding, the finite element model of spot weld, loading and resolution are also discussed andthe APDL program is wrote. 对单元选择,网格划分,焊接关系的模拟以及加载求解做了介绍,并使用ANSYS提供的参数化编程语言编制了程序。
- It shows that, the weldbonding structure is preferable to the actual using spot weld one, either in strength op in stress distributions. 结论是应用粘接点焊新技术的结构在结构强度特别是在应力分布上比点焊结构明显优越。
- Using the modulated laser beam to weld plastics simultaneously, the figure of ideal weld joint was identical with the desired one. 利用调制完成后的激光束对塑料进行同步焊接,得到理想焊缝与预知焊缝形状相同的结果。
- Results showed that high stress concentration around the spot weld edge may be the determinable factor for initializing and propagating of the high cycle fatigue crack. 分析结果表明:接头搭接区内表面上焊点边缘处的应力集中是接头高周疲劳裂纹起裂和扩展的决定因素。