您要查找的是不是：
- spring tension adjusting screw 弹簧压力调节螺钉
- Remove compression from spring by turning adjusting screw (1) counterclockwise. 通过反时针方向旋转调节螺丝(1)从弹簧上拆卸压缩件。
- The high step moves from under the adjusting screw. 使高点从调节螺钉下移动。
- Remove adjuster lever, adjuster screw and spring. 拆卸调整器杆，调整器螺丝和弹簧。
- The adjusting screw rests on the high step of the cam. 调节螺钉落在凸轮高点上。
- To Readjust- Loosen lock nut on the adjusting screw. 重新调节：松开调节螺丝上的锁定螺母。
- To Readjust - Loosen lock nut on the adjusting screw. 重新调节：松开调节螺丝上的锁定螺母。
- Fine tension adjustment with eccentric gear. 偏心齿轮式张力微调。
- To replace seat disc; shut off supply, loosen nut (51) and back off adjusting screw (53) remove spring cage (3), spring (52) and washer (62). 要更换阀座阀瓣，先关闭供应管道，松开螺母(51)，拧下调节螺丝(53)，拆卸弹簧笼(3)、弹簧(52)和垫圈(62)。
- Contrary to popular belief, piston rings don't seal the combustion pressure by spring tension. 和人们认为的不同，活塞环不能靠弹簧张力来密封燃烧室的压力。
- If thread is wound unevenly, move winder tension adjust base 3 to the right.or left until it is correctly positioned. 绕线时，请左右移动绕线张力杆座3，设定到正确的绕线位置。
- How do I increase or decrease spring tensioning? 如何增加或减小弹簧张力？
- Heavy duty adjusting screw. Adjusting screw is both slotted and knurled. 重型调节螺丝。调节螺丝既有槽也有花纹边。
- If thread is wound unevenly, move winder tension adjust base 3 to the right or left until it is correctly positioned. 绕线时,请左右移动绕线张力杆座3,设定到正确的绕线位置。
- How do I increase or reduce spring tensioning? 如何增加或减小弹簧张力？
- J. Vertical Shaft Fine Adjustment Screw. 垂直杆微调螺丝.
- Work including high levels of the following: pressure, electrical voltage, chemical concentration, heights, noise, spring tension, etc. 以下状态下的作业任务:高压、巨大电压、化学药品高度密集、高空、强噪音、高强弹力等。
- Back off tensioner adjusting nut to create slack in cables. 旋下拉伸器调整螺帽使钢缆松弛。
- First, remove all spring tension from the reel by removing the bumper assembly and allowing the spool to un-wind completely. 拆除缓冲器并让卷盘转动直至卸掉所有的弹簧张力；
- To replace seat/ stem module shut off supply, loosen locknut and back off adjusting screw. 要更换阀座/杆模块，先关闭供应管道，松开锁紧螺母，退出调节螺丝。
