您要查找的是不是：
- The static stress test verifies the correctness of the model. 最后通过静态应力试验验证该模型的正确性。
- CAE model was utilized to analyze static stress,calculate and validate torsion stiffness. 建立汽车车架CAE模型,对其进行静应力分析、扭转刚度计算与校核。
- Utilizing static finite element method based on Duncan-Chang hyperbola model,found the static stress field,make the foundation for dynamical finite element analyses. 采用Duncan-Chang双曲线模型，用计算土石坝应力及变形的静力有限元程序，对哈达山土坝进行了静力有限元分析，得到了坝体的静应力场分布，为动力有限元计算打下基础。
- The dissertation includes static stress and deformation under different work conditions, using the way of dynamic load coefficient to analyze the dynamic stress and deformation. 针对不同工况，对车架结构做了静态的应力和应变分析，用动载系数法做了动态的应力和应变分析。
- Based on the modal analysis and static stress analysis of the spindle box, it makes the mass of the spindle box optimization, the optimum parameters are attained and the design gets improved. 对箱体有限元模型进行模态和静应力分析,并以箱体质量为优化目标进行优化设计,得到最优化参数,改良了原有设计。
- Dynamic and static stress triggering 动态和静态库仑破裂应力触发
- Stress can be the undoing of so many fine players. 紧张可能是这许多优秀选手失败的原因。
- Reaserch the relations between at luffing course of horizontal movement and jib system organization's static stressing, as well as to improve the analyses means of design software of these same crane. 探寻物品在变幅过程中水平移动与臂架系统结构静态受力之间的关系,研究臂架自重平衡系统的设计与臂架系统动力响应之间的关系以及对改善该类门机的设计软件的分析手段。
- I do not get any static on my set. 我的电视机没有静电干扰。
- In the word "mother" the stress is on the first syllable. 在"mother"这一字里，重音在第一个音节上。,在＂mother＂这一字里，重音在第一个音节上。
- The Photoelastic Experiment Study of Gear's Static Stress 齿轮静态应力的光弹性实验研究
- The Design of the Scheme of Static Stress and Deformation 静态应力应变测量实验研究
- Analysis of planar static stress and its experimental study 平面静态应力分析与实验研究
- GLOBAL TEST OF SEISMIC STATIC STRESS TRIGGERING MODEL 地震静态应力触发模型的全球检验
- He reverted to smoking when under stress. 他因受到压力又恢复了吸烟的习惯。
- We led a hard life in times of stress. 在困难时期我们过着艰苦的生活。
- The statical stresses of the C-arm are measured that the C-arm s working places through experiment. 通过实验，测量了C臂在不同的工作位置的静态应力。
- In this paper, the statical stresses of the C-arm is studied through using ANSYS software by FEM and experiment. 本文采用有限元分析方法，运用ANSYS软件，对C臂的静态应力进行了深入的研究。
- Based on the model, the statical stresses on the working places of C-arm are analyzed on using ANSYS software. 通过对实验结果与有限元结果进行对比，验证了建立的模型的合理性，同时也证实了C臂所需要的静态应力太小。
