您要查找的是不是：
- A Study on Fuzzy-PIDControl of Main Steam Temperature in a CFB Boiler CFB. 锅炉主汽温。
- The predictive control and the PID controller were combined for controlling of the reheated steam temperature system. 摘要将预测控制和PID控制器结合运用于再热汽温系统的控制中。
- While the first and second-line guide to mercury location of the logger to gather steam temperature. 而第一及二线则引导到水银计记录仪的位置，以收集蒸汽的温度记录仪 。
- Please adjust attemperator and flue gas damper to increase steam temperature up as soon as possible. 请尽快调节减温器和烟气挡板把蒸汽温度升高。
- An application study for superheated steam temperature control system is carried out. 过热汽温控制是电厂锅炉控制系统的一个重要环节。
- By the combined use of a prediction control and PID controller in the control of a reheat steam temperature system. 将其应用于火电机组过热汽温控制进行仿真研究 ,结果表明所提出的预测控制算法具有优良的控制性能和很好的鲁棒性。
- How to control the ranges of reheater steam temperature during fixed pressure and sliding pressure start-up? 在定压起动和滑压起动时如何控制再热蒸汽温度？
- In high temperature, the effect of superheated steam temperature on energy consumption isn"t remarkable. 随着风温和循环风速的提高能耗降低，在较高的温度下风温对能耗的影响不显著；
- The reheating steam temperature is adjusted by a swinging burner for the 600 MW power station boiler. 600 MW电站锅炉利用摆动燃烧器来调节再热汽温。
- The reheat steam temperature is controlled by regulating gas baffle and spray desuperheating auxiliarily. 再热汽温主要采用烟气挡板调节,辅助采用喷水减温控制。
- A simulation of the superheated steam temperature control system has demonstrated the validity of the recomm. 通过对过热汽温控制系统的仿真 ,表明该算法是有效的。
- This article has discussed construction and features and problem solutions of the steam temperature control system used for Hou's Process. 介绍了联碱生产中供热蒸气温度调节系统的构成及其特性和解决问题的方法。
- The motive steam temperature of the high temperature VTE-MED technology is just the same as the that of the steam provided by the NHR. 作为选择方案之一,高温多效蒸馏海水淡化所需蒸汽参数恰好与核供热堆提供的蒸汽参数一致。因而清华大学在高温多效蒸馏海水淡化研究领域开展了实验和理论研究工作。
- The superheated steam temperature is an important parameter in the waste heat recovery system of sulfur-based sulfuric acid plant. 硫磺制酸装置余热回收系统的过热蒸汽温度是一个重要的参数。
- This article has discussed construction and features and problem solutions of the steam temperature control system used for Hous Process. 介绍了联碱生产中供热蒸气温度调节系统的构成及其特性和解决问题的方法。
- The features of reheated steam temperature control system using oscillatory burners fur 300 MW units have been analysed. 摘要分析了某300MW机组摆动燃烧器法再热汽温控制系统的特点。
- Currently,the superheated steam temperature control system in most power plants still adopts the conventional PID cascade control scheme. 目前,大多数火电厂的过热汽温控制仍然普遍采用传统的PID串级控制方法。
- The model describes the dynamics of the drum pressure, superheated steam pressure, superheated steam temperature and power output. 该模型描述了机组的汽包压力、主蒸汽压力、主蒸汽温度和输出功率的动态特性。
- Two-stage spray desuperheating control method,including the two-loop and cascade control strategies,is designed for the main steam temperature. 主汽温采用二级喷水减温控制,同时设计了双回路和串级控制策略;
- In tangential combustion system,the reheat steam temperature can be adjusted by changing burner nozzle angle to just the flame position. 在切向燃烧系统中,通过改变燃烧器喷口的角度可以调节炉内火焰中心位置,可达到调节再热汽温的目的。
