您要查找的是不是:
- When endodontic dowels were in stalled in standardized moels, direct comparisons of stress distributing properties were analysed through photoelastic stress analysis. 本研究是藉由光弹应力分析法来分析临床上经常使用的一种现成螺旋根柱,比较观察其长度及直径大小对于所产生的应力之影响。
- stress distribution property 应力分布性质
- Moreover, the 3D stress distribution is more undulant than the 2D one. 相对而言,三维的应力分布曲线起伏较大。
- Which one below can use the distributive property? 下面那道题能用乘法分配律计算?
- Stress distribution of squeeze film, first, is derived by Reynolds equation. Next, nonlinear property of a squeeze-film damper is analyzed with the aid of "two coefficient method". 首先借助Reynolds方程导出挤压油膜的压力分布 ;然后采用二系数法分析挤压油膜阻尼器的非线性特性 .
- This method depends on determining the change in stress distribution within the model when it is turned upside down. 倒置法的依据是在模型倒置时测定模型内应力分布的变化。
- Based on the distribution property of scattered points, two spatial index methods, GRID and KD-Tree, are put forward to generate regular grid DTM. 该文针对离散点的空间分布特性 ,给出了基于网格分块和KD -Tree两种空间索引技术的规则格网内插方法。
- You can create new distribution databases in the Distributor page of the Configure Publishing and Distribution property sheet. 您可以在“配置发布和分发内容”属性表的分发服务器页中创建新的分发数据库。
- The effect on the stress distribution will be negligible except in the immediate vicinity of such points. 除了紧靠荷载作用点的区域以外,上述影响均可以忽略不计。
- We defined the conditions of the plane stress distribution of thin plates subjected to in-plane forces. 我们定义了承受平面力的薄板平面应力分布条件。
- Stress distribution is determined in a thin conductive plate containing an elliptic hole under the external electromagnetic loads. 摘要给出一种针对含椭圆孔的导电薄板在电磁力作用下的分析方法。
- The phonon field and phason field stress intensity factors and stress distribution at the crack tips are also given. 进一步可以求得裂纹尖端的声子场和相位子场的应力强度因子,由这些应力强度因子求解了裂尖处的声子场和相位子场的应力分布。
- Finite element analysis has been used to calculate the stress distribution in crystals grown by the Bridgman method. 本文用有元分析法计算了 Bridgman 法生长的晶体中的应力分布。
- Objective: To analyse the difference of the stress distribution during mandible to be forced at the midline. 目的:分析不同年龄的下颌骨正中受力时,下颌骨三维有限元分布的差异。
- Conclusion:The established model may be used for the stress distribution of MCD. 结论:该模型可用于上颌全口义齿应力分布研究。
- By fully exploiting the ICI distribution property and partial channel information, two novel complexity-reduced Minimum Mean Square Error (MMSE) and Decision-Feedback Equalizer (DFE) are derived. 该文在充分利用ICI分布特性的基础上,使用部分信道信息推导出两种新的低复杂度MMSE和DFE均衡算法。
- With similar index, model test’s results predicts antetype structure’s stress distribution. 把模型试验的结果按照相似指标推算出原型结构的应力分布。
- The stress distribution and amount of deformation has been counted under different pavage conditions. 计算不同情况下该种管道的应力分布及变形量。
- Objective To observe the stress distribution of maxillary first molar and its periodontium in lingual orthodontics. 目的采用有限元的方法研究舌侧矫治过程中上颌第一磨牙牙根、牙周膜、牙槽骨应力分布的特点。
- Results: Quartz fiber post would not change the inclination of dentinal stress distribution on the whole. 结果:石英纤维桩对牙根部应力分布的总体趋势影响不大;