您要查找的是不是：
- surface mesh generation 曲面网格生成
- The Surfaces Mesh Generation Algorithm Based on the Quadtree and Advancing Front Method 基于四叉树法和波前法的曲面网格剖分算法
- Geometrical topics include partitioning and mesh generation. 几何主题包括分割和网格生成。
- An algorithm was developed for the mesh generation on the surface of solid model based on STL file in order to build an interface between plastics injection molding CAE software and CAD software. 摘要为了实现注塑模CAE软件与商用CAD软件之间的数据交换，给出了基于STL文件的三维实体模型的表面有限元网格划分方法。
- Roller roller surface mesh slotline there is a line that makes Web xuetie and extracranium. 网纹辊不朱辊的暗不天网状槽线有法规的摆列，组成瘪下的网穴。
- The proposed model can provide a fast and visually realistic simulation for elastic deformation of surface mesh models. 该模型可以对表面网格模型的弹性形变进行快速、逼真的模拟。
- At the end, an adaptive mesh generation scheme is proposed by combining AFT and Background method. 最后,将改进AFT方法和背景网格法相结合,提出了可应用于二维平面和三维实体自适应有限元网格生成的方法。
- Adaptive finite clement mesh generation is a strategy to optimize finite element mesh in line with er-ror estimation. 自适应有限元网格生成是基于误差估计,自动进行有限元网格优化的一种策略。
- By defining a rigid core for each model and introducing a new type of generalized springs, the surface mesh model can preserve its geometric features such as volume and shape. 通过定义与模型对应的刚体核，并且向模型中添加一种新的广义弹簧，保持了与表面网格模型对应的几何体体积和形状等几何特征；
- Shih,Bih-Yaw,1997, “Automatic Hexahedral Mesh Generation”,Ph,D Dissertation, Colrado State University. 施弼耀、陈国雄、刘仁俊、陈昭蓉、杨恭娟和邱郁文，民92年，”管理资讯系统”，沧海书局。
- Observation of two surface mesh fabrics are uniform coating on a layer of watercurtain, if coated on a layer of watercurtain indicates that the network version has. 查察网布两个表背是否都平均涂布上一层水幕，如果涂布上了一层水幕表现网版已纯洗肮脏。
- In this paper,a modified Laplacian mesh generation method improved by additional mesh regulation terms is presented. 提出采用网格调节项来修正拉普拉斯网格生成方法。
- It presents an algorithm for the finite element mesh generation based on quadtree and advancing front method. 摘要提出了一种基于四叉树法和波前法的有限元网格生成算法。
- C. Y. Liu and C. J. Hwang,“New Strategy for Unstructured Mesh Generation,” AIAA Journal, Vol. 39, No. 6, June 2001. 建文;“动态四面体/稜镜型网格之建立”成功大学航太所硕士论文;2005;7月.
- These formulae are suitable for any contacting point of tooth surface meshing. 这些公式适用于齿面啮合的任何接触点。
- On the basis of that, this paper ameliorates to form an improved method, namely, ameliorated advancing front approach (AAFA) as the algorithm of triangular mesh generation. 选择一种方法即边界推进算法，在此基础上提出了一种改进的边界推进算法，作为本论文生成三角形网格的算法。
- Unstructured adaptive finite element mesh generation method based on Advancing Front Technique (AFT) is studied in this thesis. 本文研究、改进和实现了非结构化自适应有限元网格自动生成的AFT方法(Advancing Front Technique)。
- How to mesh final polyhedron hulls in advancing front method is an inevitable problem in automatic mesh generation for three dimensional domains. 在利用推进波前法实现三维网格自动生成中 ,在网格生成最后阶段 ,不可避免地遇到波前三角平面找不到相应顶点 ,而导致不能生成新单元的困难。
- Examine the begin size that the quality of aluminous gusset plate basically sees its surface mesh is even, arrange orderly, the glossiness after exterior gush model is good, ply is even wait. 检验铝扣板的质量主要看其表面网眼的开头大小是否均匀，排列是否整洁，表面喷塑后光泽度是否好，厚度是否均匀等。
- As full hexahedron mesh generation is one of difficulties of mesh generation methods, it's signal to realize full hexahedron mesh generation. 另外,全六面体网格划分一直是有限元网格划分中的难点之一,实现开孔构件的全六面体网格划分具有重要的现实意义。
