您要查找的是不是：
- The application of pre-shrinking mortar in the repair to surface defects of concrete 预缩砂浆在修补混凝土表面缺陷中的应用
- surface defects of concrete 混凝土表面缺陷
- The causes and preventive measures of surface defects of accropodes are analyzed,and main points in controlling surface quality of precast accropodes. 分析扭王字块表面缺陷的成因及防治对策,阐述预制扭王字块体表观质量的控制要点。
- With the augmentation of grain size, surface defects of the manganese zinc ferrite nanocrystallines minish, and intergranular free volume combines. 随着粒径的增大，纳米晶的表面缺陷减小，晶界间的自由体积发生复合。
- The morphology of the surface defects of cold rolled stainless steel strip aud the cause of formation of them have been reported. 本文阐述了不锈冷轧带钢表面缺陷的形貌及其成因,并根据形貌及产生原因归纳成六种表面缺陷。
- treatment of concrete surface defect 混凝土表层破坏处理
- The surface defects of silver coins was analysed with augerelectron spectroscopy( AES), Scanning electronic microscope( SEM) and energy dispersive spectrum( EDS). 采用扫描电镜、量色散谱和俄歇电子能谱检测方法，对银币表面缺陷进行了分析。
- The surface defects of silver coins was analysed with auger electron spectroscopy (AES), Scanning electronic microscope (SEM) and energy dispersive spectrum (EDS). 采用扫描电镜、能量色散谱和俄歇电子能谱检测方法,对银币表面缺陷进行了分析。
- Abstract: The surface defects of silver coins was analysed with augerelectron spectroscopy (AES), Scanning electronic microscope (SEM) and energy dispersive spectrum (EDS). 文摘:采用扫描电镜、能量色散谱和俄歇电子能谱检测方法，对银币表面缺陷进行了分析。
- Ultrasonic computed tomography (CT) technique was used to detect the defect of concrete, which always was small in volume and irregular in figure. 摘要介绍了采用超声波层析成像(CT)技术检测体积很小或形状不规则的混凝土缺陷及超声波CT成像原理。
- The surface defects of silver coins was analysed with augerelectron spectroscopy (AES), Scanning electronic microscope (SEM) and energy dispersive spectrum (EDS). 采用扫描电镜、能量色散谱和俄歇电子能谱检测方法，对银币表面缺陷进行了分析。
- Ultrasonic computed tomography(CT) technique was used to detect the defect of concrete, which always was small in volume and irregular in figure. 介绍了采用超声波层析成像(CT)技术检测体积很小或形状不规则的混凝土缺陷及超声波CT成像原理。
- The machine rests on a bed of concrete. 机器安装在混凝土基座上。
- According to the analysis of the indentation's morphology characteristics,the indentation was caused by the surface defects of the work roll,a part of the hot plate leveler. 热轧厚板经热矫直工序后钢板上表面产生压痕缺陷,从压痕的形貌特征分析,缺陷是由热矫直机上工作辊辊面缺陷所致,经查上辊面确实存在缺陷。
- This paper analyzes the reason that caused the surface defect of billet produced by EAF Steelmaking plant of Nanjing Iron and Steel Co.Ltd. 分析了南(京)钢电炉厂小方坯表面质量问题及产生的原因,涉及结晶器振动参数、保护渣等。
- And discusses requirement of filling materials and processing on useng laser localized glazing technology to re-pair surface defects of ceramic products. 分析了激光局部成釉技术的加工工艺过程.;工艺条件的控制及用于陶瓷制品表面缺陷的修复对填料及工艺操作等要求
- The statue rests on a bed of concrete. 这座雕像立在混凝土的基座上。
- These buildings are made of concrete and steel. 这些房屋是用钢筋混凝土建成的。
- The results show that 82B wire rod brittle fracture is mainly caused by excessive inclusion,reticulate carbide,lower sorbite in the microstructure,and surface defect of wire rod. 结果表明,82B钢盘条脆断的主要原因是夹杂物级别超标、组织中出现网状碳化物、索氏体含量偏低以及盘条表面缺陷等。
- A defect of focus, such as blurring in an image. 像差焦点不准确而造成的物像模糊
