您要查找的是不是:
- A surface roughness tester for measuring the inside curved face of aneroid battery shell, including its principle, make-up, key design technologies, evaluation parameters and so on, is introduced. 介绍了电池壳体内曲面表面粗糙度测量系统的原理、结构、关键设计技术、评定参数等。
- electro-contact type surface roughness tester 电接触式表面粗度试验仪
- Surface Roughness Tester for Measuring Inside Curved Face of Aneroid Battery Shell 电池壳体内曲面表面粗糙度测量系统
- surface roughness tester 表面粗糙度测试仪
- Head dresser is secured high surface rough. 高精粗糙度修整装置。
- The whole software of two-dimension surface roughness automatic tester(ZD-SRAT-1) has been modified greatly, then its functions are improved and its operating time reduces a lot. 本文对二维表面粗糙度测量仪(2D-SRAT-1)软件进行了全面的改 进,使功能加强,运行时间明显缩短。
- Roughness tester for measuring bearing element surface by laser can achieve quick and nor-contact measurement of bearing clement surface roughness. It is suitable for quality control of bearing elements in production field. 激光测量轴承滚动体表面粗糙度仪可实现轴承滚动体表面粗糙度的快速、无接触测量,它适用于轴承滚动体生产现场质量控制。
- Table 1-2 Surface roughness and chrominance of treated wood. 表2处理材于水质环境下经长期试验后防腐剂之保留率.......57
- Competency in the use of measuring devices such as dimensional inspection tools, callipers, dial gauges, roughness tester and alike. 能运用数显卡尺,量规,粗糙度测量仪等仪器进行测量.
- Surface roughness has a profound effect on wind speed. 地表粗糙度对风速有相当深刻的影响。
- A New Noncontact Method for Rapidly Measuring Surface Roughness[J]. 引用该论文 胡克平;李田泽.
- Sandblasting to achieve the desired surface roughness. 清洁辊筒表面,边缘倒角。
- The adding of POSS in the polymer lowered the surface roughness. 添加POSS后聚合物表面粗糙度减小。
- Effects of different preparation procedures on abutment surface roughness. 不同预备程序对基牙表面粗糙度的影响。
- Grainy edge Surface roughness on edges of web caused on the drying process. 起皱纸边纸卷边缘在乾燥过程所引致的起皱情况。
- Grainy edge: Surface roughness on edges of web caused on the drying process. 起皱纸边:纸卷边缘在干燥过程所引致的起皱情况。
- Surface roughness of the MSD MCrA1Y coating is far lower than the one of LPPS. MSD的MCrA1Y涂层表面粗糙度远比LPPSMCrA1Y低。
- Problems such as drill life exit burr and machined surface roughness etc. 对采用超声波振动钻削微小孔时钻头的寿命、出口毛刺和加工表面粗糙度等问题进行了研究。
- Wood surface roughness was studied by using fractal dimension method. 应用分形维对木材表面粗糙度特征进行研究。
- Thirdly, microstrain-, peripherin-thick, surface roughness, resolution 3%. 不一是球磨砂纲,感平层不薄,暗地粗劣,分辨率3%25。