您要查找的是不是：
- tangential shearing stress 切向剪应力,切线剪应力
- Critical resolved shear stress (O’crss). 临界分剪切应力。
- There is a diminishing difference in the shearing stress with rising pressure. 随着压力的升高，切应力的差值减
- The crushing process is carried out by pressure and shearing stress. 在相应的压力和切力作用下,物料得以破碎。
- The interfacial shear stress is a constant proportion of the bottom shear. 交界面的剪力与底部剪力之比是常数。
- The process does not affect the shear stresses. 这样的处理并不影响剪应力。
- According to the twin shear stress theory, this paper improves on Duncan Model. 根据双剪应力理论对邓肯模型进行了修正。
- Tensile stress and shear stress are transferred by PBL shear connectors. 计算得到钠-混凝土接头的最不利荷载组合内力。
- A fluid is a substance that deforms continuously under an applied shear stress. 液体在剪应力作用下不断变形？？
- The main shear stress and its hydraulic system, calculation and research. 主要对其剪切力和液压系统进行计算和研究。
- Thus fluid shear stress has been considered one of the atherogenic factors. 在动物研究中还发现切应力与内皮细胞增生程度有关。
- With gob span increasing, equivalent shear stress in basic roof increases. 随着采空区跨度的不断增加，基本顶等效剪力不断增大。
- Draw the element for maximum shear stress and mark values of all stresses. 画出最大剪应力的单元体并标出全部应力值。
- Friction and cohesion are best defined in terms of the plot of shear stress versus normal stress given in Figure 9. 摩擦角和粘结力最好是根据图9中剪切应力和法向应力的关系曲线确定。
- The maximum shearing stress to which the material is subjected has a value equal to the radius of the circle. 材料承受的最大应力数值等于圆的半径。
- The feed material is broken between the counter-rotating rolls and crushed by pressure and shearing stress. 在压力和切力的作用下,给料在彼此相向旋转的轧辊间破碎。
- Theoretical expression ot the wall shearing stress has been deduced for the level rotary flow in an internal energy dissipation tunnel. 摘要本文推导了水平旋转内消能泄洪洞空腔环流壁面切应力的理论分析表达式。
- Cohesion is best defined in terms of the plot of shear stress versus normal stress given in Figure 9. 粘结力最好根据图9中剪切应力和法向应力的关系曲线确定。
- The occurrence of high shear stress at the fibre end is a factor which is expected to lead to crack generation. 在纤维端部存在高切变应力视为导致产生裂缝的因素。
- When the shearing stress reached 30 Pa the results of CBL, VDL and SBT cementation logging can reach the best. 水泥浆在环空流动的壁面剪应力达到30Pa时,可以保证CBL、VDL和SBT三项胶结测井结果优质。
