您要查找的是不是：
- Taper of hole in spindle nose MT No. 主轴锥孔锥度。
- taper of spindle nose 主轴头部形式
- Hence, five factors influencing the NSI of dreg protein, including the moisture content of material, extruding temperature, length of nib, gap of spindle nose, rev of strew, has been researched. 为此,研究了物料含水量、挤压温度、模孔长度、轴头间隙、螺杆转速5个因素对粕蛋白NSI的影响规律。
- Taper of bore in spindle center sleeve morse No. 主轴套内孔锥度。
- Max. Distance of Spindle Nose to Worktable 主轴端面至工作台最大距离
- Min. Distance of Spindle Nose to Worktable 主轴端面至工作台最小距离
- Application of Point-Touched Caliper with Gauge to Measurement of Spindle nose 点接触式带表卡规在主轴短锥测量中的应用
- Taper of hob arbor fitting Morse no. 主轴锥孔。
- Caution: Do not weld any part of spindle! 注意：不要在机轴任何部位进行焊接！
- Front taper of spindle bore 主轴孔锥径
- Mm Taper of spindle bore 主轴内孔锥度
- Elsewhere the token of sin, it was the taper of the sick chamber. 那字母本来是罪恶的标记，此时在病室中却成了一支烛光。
- taper of spindle bore 主轴内孔锥度
- tape of spindle nose 主轴头部形式
- The K72 series four-jaw independent chucks are of cylindrcal center mounting connected to the spindle nose by adaptors. K72系列四爪单动卡盘系短圆柱连接形式;通过过渡盘与机床主轴连接.
- The K72 series four-jaw independent chucks are of cylindrical center mounting connected to the spindle nose by adaptors. K72系列四爪大型单动卡盘系短圆柱连接形式，通过过渡盘与机床主轴连接。
- A case of spindle cell hemangioendothelioma is reported. 报告1例梭形细胞血管内皮瘤。
- Spindle nose on Gingery miller. 主轴鼻子上金格里米勒。
- For connecting the different type of spindle of drill with the drill bits. 用于不同型号钻机的主轴与钻头的联接。
- How can I persuade you of my sincerity? 我如何能够让你相信我的诚意？
