您要查找的是不是:
- terminal connection method 终端连接方法
- The specified terminal connection driver is invalid. 指定的终端连接驱动程序无效。
- The Terminal Connection driver %1 was not found in the system path. 在系统路径上没有找到终端连接驱动程序%251。
- A close operation is pending on the Terminal Connection. 一个封闭式操作在等待终端连接。
- The Client Drive Mapping Service Has Disconnected on Terminal Connection. 已在终端连接上中断客户驱动器映射服务。
- The connection method: flange connection and inner thread connection. 联接方式:法兰连接、内螺纹联接。
- The specified terminal connection driver was not found in the system path. 在系统路径上找不到指定的终端连接。
- In terms of connection method, you can choose either dial-up or broadband connection. 就接驳方法而言,你可以选择拨号或宽频接驳。
- The Client Drive Mapping Service Has Connected on Terminal Connection. 客户驱动器映射服务已连接在终端连接上。
- The connection method described in Create your flowchart is a shape-to-shape connection. 创建流程图中描述的连接方法是“形状到形状”连接。
- The requested operation cannot be completed because the Terminal Connection is currently busy processing a connect operation. 请求的操作不能被完成,因为终端连接当前正在忙于执行一个连接操作。
- Connect method will block, unless you specifically set the Blocking property to false prior to calling Connect. 除非在调用Connect之前已经专门将Blocking属性设置为false,否则Connect方法将会阻止。
- It is only necessary to use the Unix command that sets up a remote terminal connection (Telnet),followed by the address of the distant machine. 只需使用Unix命令Telnet来建立远程终端连接,命令后跟上远端计算机的地址即可。
- If you are using a connectionless protocol, you do not need to establish a default remote host with the Connect method prior to calling SendTo. 如果您使用的是无连接协议,则在调用SendTo之前,不需要使用Connect方法建立默认远程主机。
- It is only necessary to use the Unix command that sets up a remote terminal connection (Telnet), followed by the address of the distant machine. 只需使用Unix命令telnet来建立远程终端连接,命令后跟上远端计算机的地址即可。
- This overload sends datagrams to the remote host established in the Connect method and returns the number of bytes sent. 此重载将数据报发送到在Connect方法中建立的远程主机,并返回发送的字节数。
- The requested operation cannot be completed because the terminal connection is currently busy processing a connect, disconnect, reset, or delete operation. 由于终端连接目前正在忙于处理一个连接、断开连接、复位或删除操作,无法完成该请求的操作。
- The paper mainly describes the connection method with SLIP/PPP and LAN and setup, theconcept about IP and Domain Name, the application of Internet. 本文主要阐述了上网用户通过电话拨号(SLIP/PPP)和局域网(LAN)与Internet联接、参数配置的方法,以及IP地址和域名(Domainname)的概念,及Internet的应用。
- The full performance parallel thread splicing ,as one kind of the wide-diameter rebar connection technology, is a newly developed connection method. 钢筋等强直螺纹连接技术是粗直径钢筋连接技术中的一种,是近年来开发出来的一种新型钢筋连接技术。
- Megohm inspection method is to form a terminal connected to the electric cable line, another terminal connected to the motor casing, the shake table megohm observed value of insulation resistance. 检查方法是将兆欧表上的一个接线柱接在电泵电缆线上,另一接线柱接在电机外壳上,摇动兆欧表,观察绝缘电阻值。