您要查找的是不是:
- The preparation of ternary boride hard alloy cladding layer on steel substrate is studied. 研究采用铸渗法制备三元硼化物硬质合金覆层钢基材料。
- The conclusion can be used to guide the manufacturing of ternary boride cermets cladding parts. 本文的研究结果对于三元硼化物金属陶瓷硬质覆层零件的制造具有实际意义。
- The ternary boride base cermets have exhibited good mechanical properties and excellent wear and corrosion resistance. 指出三元硼化物基金属陶瓷具有良好的机械性能和杰出的耐磨、耐蚀等性能;
- The influence of alloy ingredient on corrosion resistance of ternary boride cermet clad materials was studied. 研究了合金组分对覆层材料耐腐蚀性的影响。
- Basing on the fabrication technology of ternary boride cermets cladding material (6B) , its interface formation mechanism is studied. 根据三元硼化物金属陶瓷硬质覆层材料6B的制备工艺,研究了该硬质覆层材料界面过渡层的形成机理。
- The reaction sintering process and production process of ternary boride base cermet produced by reaction sintering method were introduced. 介绍了用反应烧结法制备三元硼化物基金属陶瓷的反应烧结过程及一般制备工艺过程;
- Ternary boride based cermet cladding material was prepared by in situ reaction and liquid phase sintering technology in vacuum furnace. 在真空烧结炉中通过原位反应液相烧结工艺制备出三元硼化物基金属陶瓷覆层。
- Ternary boride cermets material is fabricated by cladding cermets on steel substrate with liquid sintering technology.During its fabrication the cladding thickness will shrink. 三元硼化物金属陶瓷硬质覆层材料是利用液相烧结技术在钢基体上涂覆金属陶瓷而制得的新型层状复合材料,在烧结过程中,覆层的厚度会发生收缩。
- Using in situ formation of ternary boride base cermets hard phases through chemical reactions and sinterbonding onto steel substrates though liquid sintering we successfully prepared a kind of ternary boride base cermet. 摘要通过化学反应将原料粉来生成三元硼化物硬质相并通过液相烧结烧与钢很好的结合,用这种工艺成功地在钢基体上涂覆了预压制的三元硼化物基金属陶瓷。
- The properties such as high hardness,excellent properties of abrasive resistance,corrosive resistance,physical and mechanical of ternary boride cermets are introduced briefly (also tested,analysed and discussed)here. 同时对三元硼化物基金属陶瓷的耐磨性、耐腐蚀性、相关的物理性能和力学性能作了测试、分析和探讨。
- A ternary boride carbide alloy is clad on the steel substrate to form a new type of clad material with excellent wear and corrosion resistance by means of the liquid phase sintering technique. 采用液相烧结法在钢基体表面制备三元硼化物硬质合金覆层,将三元硼化物硬质合金的优异性能赋予钢基体表面,获得了耐磨抗蚀、界面结合强度高的新型硬质覆层材料。
- As there's close relation between the properties and the content of alloying elements,effects of alloying elements must be paid attention to during the designing process of ternary boride base cermet. 由于三元硼化物基金属陶瓷的性能与合金元素的含量有密切的关系,所以在进行三元硼化物基陶瓷的设计过程中要特别注意合金元素的作用。
- Abstract: Using liquid phase sintering technique, ternary boride cermet clad material was prepared, and have good properties as lower cost, high wear resistance, high corrosion resistance. 摘要:采用液相烧结技术制备的三元硼化物基金属陶瓷覆层材料具有成本低廉、耐磨抗蚀的优异性能。
- Research on Ternary Boride Based Cermet 新型三元硼化物基金属陶瓷的研究
- ternary boride cermets cladding material 硬质覆层材料
- Keywords Ternary Boride;Cermet Cladding;Corrosion Resistance; 三元硼化物;金属陶瓷覆层;耐腐蚀性;
- Keywords steel A3;ternary boride;laminated material;microstructure; A3钢;三元硼化物;覆层材料;显微结构;
- Keywords ternary boride;steel;cermet;cladding material; 三元硼化物;钢;陶瓷;覆层材料;
- Study on Corrosion Resistance of Ternary Boride Cermet Clad Materials 三元硼化物金属陶瓷覆层材料耐腐蚀性能研究
- Keywords Ternary boride;Cladding material;Cast sintering;Microstructure; 三元硼化物;覆层材料;铸造烧结;微观结构;