您要查找的是不是:
- Purpose: To test check valve No. 1 for tightness. 目的:检测止回阀1号的密封性。
- Purpose: To test check valves for tightness in the direction of flow. 目的:检测止回阀在流向上的紧固性。
- Purpose: To test check valve No. 2 for tightness against reverse flow. 目的:检测止回阀2号对于回流的密封性。
- F the keeping things, do spot test check usually to keep the ac in accdance with the materials as well as the all acs. 对所保管的物品,平时做到勤抽查,勤核对,保证做到帐物相符,帐帐相符。
- This test checks whether a standard sampling is done. 这个测试检查是否完成标准取样。
- The second test checks the ticket's lifespan and timestamp. 第二项测试检查票的有效期和时间戳。
- These tests check the translatability and localizability of the software. 这些测试将检查软件的译本和本地化情况。
- This test checks whether the monitoring of the ejection force is operative. 这个测试是检测剔片喷出压力是否有效。
- Not only does the modified test check the view rather than the model, it also checks the content of selected rows, rather than just the number of rows. 修改后的测试不单检查模型,还检查视图,而且不只简单地检查行的数量,还检查所选行的内容。
- A simple test will show if this is real gold. 简单的试验就能证明这是否是真金。
- Monthly Tests Check the hand-piece for damage Check the USB cable and connector for damage. 每月检测检测手机有无损坏。检测USB数据线和联接器有无损坏。
- This test checks whether the manual function and the automatic function of the deduster work correctly. 这个测试是检测除尘器手动和自动工作是否正常。
- This test checks whether the tool protection functions when the permitted punch load is exceeded. 这个测试是检测冲压过载时是否能有效保护模具。
- In the Project 'TestProject' configuration dialog box, select the Use a secondary connection to validate unit tests check box. 在“项目‘TestProject’配置”对话框中,选中“使用辅助连接验证单元测试”复选框。
- This test checks whether the individal selection by blowing out samples can be activated and whether no reject tablets will arrive in the good channel. 这个测试是检验是否能吹出单个的选择样品,是否有不合格片剂进入合格通道。
- This test checks whether the individual selelection by using the main gate can be activated and whether the faulty tablets will be separated. 这个测试是检测主通道单片选择是否有效,有缺陷的片剂是否能分开。
- This test checks whether the monitoring of the compaction force works in case of an infringement of the tolerance limits. 这个测试是检测假设监控压力超过公差范围是否起作用。
- This test checks whether the tablet press is switched off as soon as a metal detection takes place by the configured metal detector. 这个测试是检查配置的金属探测器一探测到压片有金属就停机。
- Pupils who pass the test will be promoted to the next higher grade. 小学生只要考试及格就会升到高年级。
- This test checks for proper connection, impedance balance between the phases and minor or impending short circuits in the windings. 对于连接是否恰当、相位之间阻抗是否平衡和线圈绕组里的紧急短促小电流,也进行全面的检测。