您要查找的是不是：
- tetrahydrofuryl methacrylate 甲基丙烯酸四氢糠醛酯
- ACR is a copolymer of methyl methacrylate with acrylate. ACR是一种甲基丙烯酸甲酯与丙烯酸酯类的共聚物。
- Poly(isodecyl methacrylate), solution in toluene, average ... 询价 聚(甲基丙烯酸异癸酯)；
- In benzene or ethyl acetate solution rates increase linearly with methyl methacrylate concentration. 在苯或乙酸乙酯溶液中其衰减速度随甲基丙烯酸甲脂浓度呈直线地增大。
- The polymerization of butyl methacrylate initiated by trichloromethane and tetra-chloromethane were also discussed respectively. 同时还分别对以三氯甲烷、四氯化碳为引发剂时甲基丙烯酸丁酯的聚合反应进行了讨论。
- With methyl methacrylate the particle diameter increases linearly with conversion indicating particle aggregation. 采用甲基丙烯酸甲酯时，粒子直径随转化率呈直线增大，这就表明粒子发生了聚集。
- AgCl//PMMA organic-inorganic hybrid membrane was prepared by reverse microemulsion polymerization using methyl methacrylate(MMA) as oil phase. 以甲基丙烯酸甲酯(MMA)为油相,利用微乳液聚合技术制备了氯化银/聚甲基丙烯酸甲酯(PMMA)有机-无机杂化膜。
- The developing process of the certified reference material of polymethyl methacrylate for oxygen index was introduced. 介绍聚甲基丙烯酸甲酯氧指数标准物质的研制过程。
- The kinetics of graft copolymerization of SBS and methyl methacrylate in toluene initiated by BPO was investigated. 以过氧化苯甲酰(BPO)为引发剂,甲苯为溶剂,膨胀计法研究甲基丙烯酸甲酯与SBS接枝聚合反应动力学。
- We studied the dosage of methyl methacrylate (MMA) and density effect on the mechanics proper of CE/PMMA-IPN. 研究了甲基丙烯酸甲酯(MMA)的含量对CE/PMM-IPN体系的力学性能及密度的影响。
- Extrusion of profiles, tubes and light diffusers in polycarbonate, methacrylate, abs and blend, for... 分类标题：塑料管道和管子塑料型材...
- Glycidyl methacrylate(GMA) modified soy protein isolate(SPI) plastics were prepared via the compression molding. 用模压的方法制备了甲基丙烯酸缩水甘油酯(GMA)改性大豆分离蛋白质(SPI)塑料。
- In the second stage operation, a wire mesh-methyl methacrylate was used as the material of cranioplasty. 在第二阶段的手术，我们以钢网骨泥为材料，施行颅骨成形术，以便保护脑部。
- Methacrylate photoresist was one of the tradition photoresists and it had high transparent and resolution. 甲基丙烯酸树脂光刻胶是传统的光刻胶之一,具有高度的透明性及分辨率。
- Kinetics of methyl methacrylate (MMA) bulk polymerization is investigated in this paper. 摘要对甲基丙烯酸甲酯(MMA)本体聚合动力学进行了研究。
- Advance in modification of polyolefin grafted with glycidyl methacrylate was reviewed in this paper. 本文综述了甲基丙烯酸缩水甘油酯接枝聚烯烃的研究进展。
- It bas been found that these copolymers are more heat-resistant than polymethyl methacrylate. 酰胺为24%25以下的共聚合物通常都是无色透明坚硬的玻璃状固体。
- Polymethyl methacrylate is the most frequently used denture base material in clinic. 聚甲基丙烯酸甲酯是临床上最常用的义齿基托材料。
- The long chain alkyl methacrylate was synthesized by an im proved melt esterification method. 用改进的熔融酯化法制备了甲基丙烯酸十六酯。
- A two-stage process was used to graft 2-hydroxyethyl methacrylate (HEMA) by free radical polymerization onto PAN. 本研究以两段式操作，利用自由基聚合法，把亲水性单体接枝在聚丙烯腈表面上。
