您要查找的是不是：
- Approach to Design a Matching Network in the RF Circuit 射频级间匹配电路的设计方法
- The RF Circuit Embedded in DFB Laser Negative Effect Under Gain-Switching Operation 内置RF电路对增益开关工作的不利影响
- Difference Scatter Parameter in the RF Circuit of Mobile by Means of the Single Terminal Vector Network Analyzer 用单端矢量网络分析仪测试手机RF电路的差分散射参数
- Fundamentals Of Rf Circuit Design With Low Noise Oscillators (Everard).part1. rar(该附件已经被下载1次，下载需要1积分！
- the RF circuit 射频电路
- A non-linear device or junction in the input circuit can rectify the RF energy and cause significant errors. 输入电路中的非线性器件或结能够将RF能量整流，并引起很大的误差。
- LES BESSER .ROWAN GILMORE “Practical RF Circuit Design for Modern Wireless Systems” 2003 ARTECH HOUSE,INC. 黎慧玉;”感测器与转换应用电路-设计与实习”;高立1998.
- Familiar with the RF test environment design and calibration. 熟悉RF 测试环境设计和定标。
- They are connect cable in RF circuits or electronic equipment. 可与国际上同类型连接器互换使用。
- LNA is the critical component in the RF front-end circuits. 低杂讯放大器在射频前端系统中是一个很重要的元件。
- They are for connect cable in RF circuits of electronic equipment. 能与国际同类产品互换使用。
- The RF front-end chip is composed of several circuit blocks including low noise amplifier (LNA), mixer, frequency synthesizer, IF filter and limiter. 射频前端芯片包括低噪声放大器、混频器、频率综合器、中频滤波器和限幅放大器等主要模块。
- Bachelor degree in Electrical/ Electronics / Telecommunication Engineering with minimum 5 years relevant experience in microwave or RF circuit design or application. 电子；通讯工程及电子相关的本科文凭，有至少5年以上微波或射频电路设计经验优先。
- The power of the modulated carrier wave is increased by the RF power amplifier. 射频功率放大器增加了调变载波的功率。
- The module design contains transmission line, bias and APC circuit of LD, low noise and high linearity RF circuit, FSK modern, monitor and control circuit design and PCB layout. 本文重点进行了光模块主要的电路包括传输线、LD偏置电路与APC电路、低噪声高线性射频电路、FSK调制与解调功能电路与监视控制功能电路的设计。
- The RF positive of the RA group and CTD group were 85.6%, 29.6% respectively. 结果血清RF阳性率在RA组与CTD组分别为85.;6%25(107/125)和29
- The attenuation rate of the RF is fast when the gas holdup is small. 这一结论已经被本文实验测量结果所验证。
- Next we simulate the performance on RF circuit by ADS, for example we simulation the S-parameters of LNA, and we make sure the LNA of work frequency, gain, isolation, and noise. 在来透过ADS模拟软体模拟模组的效能，如模拟LNA的S参数，并观看该LNA的工作频率是否符合需求，以及放大增益、隔离度或杂讯指数等是否符合规格。
- In this study, the RF sputtering system has been investigated comprehensively. 中文摘要本篇论文主要是探讨RF溅镀系统之研究。
- Most studies have focused on the RF exposures of mobile phone users. 大多数研究都聚焦在手机使用者的射频讯号暴露值上。
