您要查找的是不是：
- the cone sharpening method 锥面磨削法
- Only objects within the cone are illuminated. 只有锥以内的物体才会被照亮。
- This paper introduced the only spinning method for the cone bush of a outsize shape. 对特大形状的锥形衬套唯一采用旋压方法进行了介绍。
- Test Method for Yield Stress of Heterogeneous Propellants by the Cone Penetration Method (05. 用针入法测定非均质推进剂的屈服应力的试验方法(05。
- A simple method is proposed to construct the cone formed by the friction forces and moments. 提出一种简单的方法快速构造摩擦力和摩擦力矩形成的圆锥。
- The Cone bobbin with holes is recommended for heating. 蒸纱推荐网眼络纱管。
- SpotSi - The angle at the tip of the cone, or the Spot aperture. 圆锥体顶角角度,或是聚光灯孔径。
- Spotsize: The cone angle of the spot light, in degrees. 定位光照在锥形上的角度。
- Tape the circular bottom of the cone to the Styrofoam plate. 将八开图画纸捲成圆锥状.;将开口处黏贴好;并将底部剪成圆底
- The method seems good but it needs to be tried out. 这个方法似乎不错，但需要试验一下。
- This interaction forces the cone to move, creating sound waves. 这一相互作用促使锥形物移动，产生声波。
- While holding down on the cone, tighten the subbase screws. 用手压住漏斗，拧紧座垫固定螺丝。
- Please sharpen the edge of this axe. 请把这把斧头的刃磨快。
- The cone penetration process is numerically simulated by using the large-strain finite element method and a simple theory of interface. 采用大变形有限元和简单的接触面理论;数值模拟了静力触探的探入过程.
- A large rake gear shaper without theoretical errors is designed,at the same time,the tool sharpening methods and related device are given. 提出一种大前角、无理论误差的插齿刀及其刃磨原理和刃磨装置。
- Developing the cone crusher chamber was one of the best method for transforming the cone crusher and reducing the grinding particle size. 优化圆锥破碎机破碎腔型是改造圆锥破碎机、降低磨机入磨粒度的经济可行而又效果显著的方法之一。
- The truing and sharpening methods of CBN wheels are summarized. The characters of the truing and sharpening methods as well as their applications are analyzed. 综合评述了CBN砂轮的整形和修锐方法,分析了各种方法的特点和应用。
- Ring's diameter increases as we move away from the apex of the cone. 诸圆环的直径自圆锥顶逐渐增大。
- According to the property of large and pure lag and parameter time-varying of the cone crusher, the paper puts forward the fuzzy complex control method. 针对圆锥破碎机控制系统的大纯滞后和参数时变的特点,提出了模糊复合控制方法。
- The center of the cone of fire does rise above 1 meter from the ground. 射击台的中心确实高于地面1米。
