您要查找的是不是:
- the plasma spraying welding 等离子喷焊
- Principle and characteristic of the plasma spraying were introduced. 介绍了等离子喷涂的原理及特点;
- The result of practice indicated that its servicelife after intensifying with oxyacetylene spray welding was more than double of the new one intensifying with plasma spraying. 实际使用结果表明:排粉风机叶轮经修复和氧乙炔喷焊强化后,其使用寿命比原等离子喷涂强化的新叶轮提高1倍以上。
- The plasma spraying experiments were carried out using various argon-nitrogen volume mixture ratios,and the corresponding coatings were obtained. 采用了不同的氩氮体积混合比进行等离子喷涂实验,并获得相应条件下的涂层。
- The technology for the plasma spraying of potassium titanate thermal barrier coating was investigated using orthogonal test. 为了探索六钛酸钾热障涂层的制备工艺,通过正交试验分析方法,采用等离子喷涂工艺制备了钛酸钾热障涂层。
- By means of the schlieren method and the analog-data technique, the phenomena and data in the process of the plasma spraying were observed, recorded and analyzed. 摘要结合纹影成像等测试技术和数值模拟技术,考察、记录和分析等离子喷涂过程中的现象与数据,揭示等离子射流动力学和热物理特性,研究上述特性对涂层质量的影响规律。
- The development of the plasma sprayed structural coatings was predicted. 展望了等离子喷涂结构涂层的发展前景。
- In the plasma spray rapid metal tooling, the wearable metal film with high hardness is formed on the sprayed prototype by robotic plasma spraying. 摘要在等离子喷涂快速制造金属模具工艺中,采用机器人等离子喷涂成形工艺,在被喷涂原型表面生成具有较高硬度的耐磨金属涂层。
- Progress of research on the plasma sprayed structural coatings,including WBCs TBCs and CRCs,was summarized. 综述了等离子喷涂结构涂层的研究进展,包括耐磨涂层、热障涂层、耐蚀涂层;
- The results of the wear, abrasion and corrosion tests show that the abrasion and corrosion resistance of the laser cladding is better than that of the plasma spray coating. 耐磨性、抗擦伤性和耐腐蚀性等性能实验表明 ,与等离子喷涂层相比 ,激光熔覆层具有较好的抗擦伤性能和耐腐蚀性能
- plasma spraying welding 等离子喷焊
- Research on the plasma spraying metal tooling of automobile body panel 汽车车身覆盖件模具熔射快速制造技术研究
- The Plasma Properties of Laser ablated HgCdTe[J]. 引用该论文 满宝元;王象泰;官文栎.
- The process of plasma arc powder surfacing for inside surface of the rubber crowd machinery barrel is investigated and the correctness spraying welding procedures are given. 研究了橡胶挤出机机筒内表面采用粉末等离子弧喷焊的工艺方法,给出了机筒喷焊的最佳规范。
- Design of PLC Applying to Plasma Spray Welding System for Triple Eccentric Butterfly Valve PLC应用于三偏心蝶阀等离子喷焊系统的设计
- Development of plasma spray welding equipment of triple eccentric butterfly-type valve 三偏心蝶阀等离子喷焊设备的研制
- Investigation of anti-high-frequency interference in the plasma spraying equipment with microcomputer control 微机控制的等离子喷涂设备抗高频干扰的研究
- Investigation of Plasma Spray Welding Technology and its Application in Hot Rolling Guide Plate 等离子喷焊工艺试验及其在热轧导卫板上的应用
- Investigation of tracking control system for plasma spray welding of triple eccentric butterfly valve 三偏心蝶阀蝶板自动等离子堆焊跟踪控制系统的研究
- The failure Analysis of. Drawing Die for the Fan Pulley and Study on the plasma Spraying for the Anti-Wearing Strengthening 汽车风扇皮带轮模具的失效分析及等离子喷涂强化研究