您要查找的是不是：
- J.F.C.Khaw, B.S.Lim, and L.E.N.Lim, “Optimal Design of Neural Networks Using the Taguchi Method,” Neurocomputing, Vol. 7, No. 3, 1995, pp. 225-245. 梁湘宜，应用田口损失函数改善投资组合选择之研究，云林科技大学企业管理研究所，硕士论文，民国90年。
- N. Logothetis, and A. Haigh, “Characterizing and Optimizing Multi-Response Processes by the Taguchi Method,” Quality and Reliability Engineering International, Vol. 4, No. 2, 1988, pp. 159-169. 庄富凯，压电陶瓷马达之动态数值模拟暨最佳化设计(田口方法)与实验研究，中原大学机械工程研究所，硕士论文，民国90年。
- The Design of Work Order of the Base-Bleed-Rocket Unit By the Taguchi Method 底排-火箭工作时序参数的正交计算设计
- The Calibration Formula and the Uncertainty of Measurement for Instrument Calibration Deduced with the Taguchi Method 用田口方法推断仪器的校准公式及测量不确定度
- the taguchi method 田口方法
- 1 N. Logothetis and A. Haigh , Characterizing and Optimizing Multi-Response Processes by the Taguchi Method, Quality and Reliability Engineering International, Vol. 4, No 2, pp. 159-169, 1988. 2王宗富，多重品质特性制程参数最佳化研究-以高分子有机电激发光显示器，国立台湾科技大学，硕士论文，2000年。
- The application of Taguchi method in woodwork numerical control processing has been validated by using a confirmation experiment. 通过验证试验确认了田口法在木制品数控加工中应用的有效性。
- Based on Taguchi method and uniform design method, the three-dimensional numerical parametrical study of offset strip fins was conducted at low Reynolds number. 摘要基于田口方法，结合均匀设计法对低雷诺数工况下错列锯齿型翅片进行三维参数化数值研究。
- From the analysis of Taguchi method, the wafer types, the depth of cut and the coolant flow rate in dicing process had significantly effects for the maximum dicing width. 矽晶片切割之去除机构以延性磨削为主，但是在切割道边有脆性破坏产生。
- The method seems good but it needs to be tried out. 这个方法似乎不错，但需要试验一下。
- Analyzing the characteristics of Taguchi method and tolerance model of robust design, we advance a new strategy of robust optimization designprocess based on Taguchi method and tolerance model. 分析了田口方法和容差模型法的各自特点,提出了一种综合运用两种方法使其互补的稳健优化设计进程策略。
- Furthermore, the models with the best geometric control factors being obtained to undertake processing parameters optimization of Taguchi method, improvement of warpage will be further obtained. 而后再更进一步以所得到之最佳几何控制因子组合来进行制程因子之田口最佳化，藉此获得更进一步的塑件翘曲量之改善。
- Few companies have embarked on implementing Taguchi methods in order to reduce the inherent variability in their processes. 只有很少的公司着手实施TAGUCHI法来减少流程中固有的偏差。
- The wind whirled the dead leaves about. 风吹得枯叶在四处回旋。
- Apply the optimization design idea of the "Taguchi Methods", aim at the antiradar coating's flexility and adhsion are bad and it's characteristic. 摘要应用“田口方法”的优化设计思想，针对吸波涂料柔韧性差、附着力低的不足及其特点。
- The wind was whispering in the trees. 一阵风穿过树林沙沙作响。
- There are 26 letters in the English alphabet. 英语字母表中有26个字母。
- Apply the optimization design idea of the "Taguchi Methods",aim at the antiradar coating's flexility and adhsion are bad and it's characteristic. 应用“田口方法”的优化设计思想,针对吸波涂料柔韧性差、附着力低的不足及其特点。
- Foreign nationals were asked to leave the country. 外国侨民被要求离开该国。
- A cloud is a mass of vapor in the sky. 云是天空中的水汽团。
