您要查找的是不是：
- thin copper tube 薄壁铜管
- Golden Dragon Precise Copper Tube Inc. 世界最大铜管生产商金龙精密铜管公司。
- GOLDEN DRAGON PRECISE COPPER TUBE GROUP INC. 金龙铜管集团。
- GT series hole-passing connection bube is made of T2 copper tube . GT系列通孔型连接管，采用T2铜管料制造。
- Expanding heat exchanger coil's hairpin tube or copper tube. 冷冻空调特殊散热盘管扩张之制作。
- The dropwise condensation (DWC) of water vapour has been achieved on the ultra thin poly(HFP) film coated on copper tube surfaces which has been prepared by the technique of plasma polymerization. 采用等离子体聚合技术制备了铜基聚六氟丙烯薄膜，并实现了水蒸汽的滴状冷凝。
- The conductor of busbar can be round copper tube, aluminium alloy tube or bar. 母线系统的导体用圆形铜管、铝合金管、棒。
- The main application products of copper alloy are copper wire for WEDM、copper tube for air conditioner、copper tube for heat sinker. 铜合金应用制品主要有线割放电加工用电极铜线、空调设备用铜管、散热器用铜管。
- Continuously Annealing Stove of Copper Tube Roller-Bottom Style Micoxidation from Arom America EF corporation. 从美国EF公司引进的铜管辊底式微氧连续退火炉。
- The alloy No and temper of copper tube shall conform to the requirements in table 1. 光管的牌号和状态应符合表1的要求。
- Install the valve onto the copper tube and gently slide compression nut and ferrule up to the valve to engage. 在铜管上安装阀门，然后轻轻地把压缩螺母和套圈移到阀门上并进行啮合。
- ADJUSTED PRESSURE/TEMPERATURE RATINGS FOR JOINTS MADE OF COPPER TUBE AND SOLDER END VALVES? 在连接铜管和焊接端口阀门时要核对压力/温度额定值?
- New Developments in Thin Copper Foils 薄铜箔的新发展
- Foshan Chancheng Nanzhuang Shangjin Copper Tube Factory is located at Pearl River Delta. 佛山市禅城区南庄上金铜管厂，位于我国发展迅速的珠江三角洲地区。
- For compression end connection, first slide compression nut onto copper tube, then slide on ferrule. 对于压缩端口连接，首先将压缩螺母移动到铜管上，然后装上套圈。
- The outside diameter of copper tube shall be tested by Micrometer. The tooth depth and the bottom wall thickness shall be tested by Microscope. 外径尺寸用外径千分尺测量.;齿高和底壁厚用双目倒置小金相测量。
- Solder Joint - NIBCO pioneered the development of the solder joint and its application to the field of copper tube piping. 焊料连接-美国尼伯科公司是开发焊料连接方式的先驱者，并将这种连接方式应用到铜管管道领域。
- These products are applicable to connect the circutar wire and hemicycle-sector GT series hole-passing connection tube is made of T2 copper tube. 连接管适用于配电装置中各种圆型，半圆扇型电线，电力电缆之间的连接。GT系列通孔型连接管，采用T2铜管料制造.
- Before cold extrusion T3 copper tube surface appears serious corrosion after soften anneal and pickling, which cause the whole products rejected. 摘要T3铜管衬套在冷挤压成型前的软化退火、酸洗后其表面产生严重腐蚀，造成整批产品报废。
- It is dangerous to walk on thin ice in a lake. 在湖中薄冰上行走是很危险的。
