您要查找的是不是：
- The form of distortion of work piece was studied, and the software rectification method of three coordinates measurement data was pot forward accordingly. 摘要研究了工件的变形形式，并依此提出三坐标测量数据的软件矫正法。
- Contacting three coordinates measurement 接触式三坐标测量
- The orientation accuracy of the PH9/PH10 probe head has been improved,thus the rotary probe system of three coordinates measuring machine(CMM)can be calibrated once for all. 提高了 PH9/ PH10回转体的定位精度 ,从而实现三坐标测量机回转测头系统的一次性标定
- On the basis of experience with measurement this paper discusses the concentricity and roundness error measurements by three coordinates measuring machine from the viewpoint of the author. 本文在测量实践的基础上,对三坐标测量机测量圆度和同轴度误差进行探讨,论述了作者的看法和改进意见。
- Error Detection of Three Coordinates Measuring Tool 三坐标测量机的误差检定
- At last, the tooth profile is measured and the errors in tooth profile and aptness are evaluated by three coordinate measurement machine. 最后,利用三坐标测量机对进行仿真的锥齿轮廓面进行了测量,并评定了齿轮的齿形和接触迹误差,同时进行了齿轮副接触区域的运转实验。
- Three coordinates measuring machine 三坐标测量机
- Of or relating to the coordinate system, or to any of three coordinates in it, formed by two polar coordinates in a plane and a rectangular coordinate measured perpendicularly from the plane. 坐标系的坐标系的，或者与坐标系有关的，或坐标产生三条坐柱中的任一个的，这个坐标系由一个平面上的两个极线坐标和一个平面上垂直测量的直角坐标形成
- It can be applied to deal with the measured data of spatial straightness obtained by three coordinate measuring machines (CMM). 可用于二坐标测量机等测量系统的空间直线度误差测量的数据处理。
- The mode of the distortion of workpiece was studied. A software approach for rectifying three coordinate measuring machine data was proposed. 研究了工件的变形形式,并依此提出三坐标测量数据的软件矫正法。
- Description on Z-Axis Balance System of Three Coordinates Measuring Machine 三坐标测量机Z轴平衡系统综述
- three coordinates measurement 三坐标测量
- According to the cloudy data achieved by three coordinate measuring machines, a method of reconstructing quasi-uniform B-Spline surface and decomposing it with wavelets was proposed. 摘要根据三坐标测量机测得的点云数据，提出了一种准均匀B样条曲面重构和小波分解方法。
- Three Problems in Measuring the Round Radius of Workpieces with Three Coordinates Measuring Machine 应用三坐标测量机检测工件圆弧半径的三个问题
- Three coordinates measuring method of elbow-pipe sensor's ratio of curvature and diameter 弯管传感器弯径比的三坐标测量方法
- Keywords Roundness error;Minimum circumscribed circle evaluating;Three coordinates measuring machine; 圆度误差;最小外接圆评价法;三坐标测量机;
- Keywords roundness error;maximum inscribed circle evaluating;cartesian coordinates;three coordinates measuring machine; 圆度误差;最大内接圆评价法;直角坐标系;三坐标测量机;
- Three coordinate measure machine 三坐标测最仪
- Three coordinate measuring machine (CMM) 三坐标测量机
- Flexible three coordinate measuring machine 柔性三坐标测量机
