您要查找的是不是：
- Thrust vectoring jet flow interferes the flow over aircrafts,drives its aerodynamic load to vary,and may potentially influence the controllability of aircrafts. 矢量推力喷流对飞行器绕流具有干扰作用,引起飞行器气动载荷变化,对飞行器操纵性也有潜在影响。
- The Investigation of the Influence of Thrust Vectoring Jet Flow on Aircraft Aerodynamic Load 矢量推力喷流对飞行器气动载荷影响的研究
- thrust vectoring jet flow 矢量推力喷流
- In this paper, the flow mechanism and the applications of thrust vectoring using synthetic jet are studied in theory, numerical simulation and experiment. 本文采用理论分析、数值模拟与实验相结合的方法对合成射流流动机理及推力向量控制中的应用进行研究。
- thrust vectoring jet engine 喷口转向喷气发动机
- Lastly, the results of unsteady flow point out, counterflow thrust vectoring nozzle is a efficiency fluidic vectoring nozzle. 最后，非定常流的结果进一步表明，逆流喷管是一种较高效率的射流式矢量喷管。
- For the jet tab TVC,the thrust and lateral forces and thrust vector deflection angles with respect to the nozzle exit area blockage ratio and the depth of water were obtained. 对扰流片推力矢量方式 ,获得了推力、侧向力、推力矢量角随发动机喷口堵塞面积比、水深的变化规律。
- Internal performance of unsteady flow of counterflow thrust vectoring nozzle has researched base on numerical simulation. 摘要基于数值模拟方法，研究了逆流矢量喷管非定常内流性能。
- The force for thrust vector control produced by the secondary injection gets bigger with the increase of flow mass and angle. 塞式喷管轴向力的增加随着二次流流量的增加而增加,但是二次流对轴向力的增加与二次流喷射的角度成反变关系。
- By measuring the thrust and lateral forces of solid rocket motor during firing conditions,the thrust vector control performances of jet tab TVC and movable nozzle TVC were studied. 通过测量固体火箭发动机水下工作过程中的推力和侧向力,研究了扰流片和摆喷管两种推力矢量方式的水下推力矢量特性。
- It can be concluded that both reaction jet control system (RCS) and thrust vector control (TVC) can be used in the over the shoulder mission. The velocity loss is inevitable and the loss generated by RCS is less than that by TVC during the agile turn. 结果表明反作用喷气控制系统和推力矢量控制系统都可以用于越肩发射,在转弯过程中速度损失是不可避免的,反作用喷气控制系统可以产生的速度损失较小。
- The vectoring jet effects are not only limited on the afterbody near the nozzle, but also on the forebody far away from the nozzles. 而喷流对附着流动和稳定旋涡流动的干扰效应最弱且集中于喷 口附近。
- The mathematical model of turbofan engine transient process with thrust vectoring nozzle was established. 建立带矢量喷管的涡扇发动机动态数学模型。
- In the paper,nozzle basic concept,work theory and development of fluidic thrust vectoring techniques are introduced. 射流推力矢量控制技术是一种全新概念推力矢量技术,其具有机械式推力矢量喷管无法比拟的优点。
- The jet flow radiation computational method of axis-symmetry nozzle and rectangle nozzle are also discussed. 研究了轴对称喷管和二元矩形喷管喷气流辐射的计算方法。
- The effects of thrust vectoring angle and angular velocity of vectoring on turbofan engine operation were investigated. 研究了矢量喷管偏转角和偏转角速度对涡扇发动机工作的影响。
- There are two flow forms in the stepped spillways , which are skimming flow and jet flow. 1：研究表明台阶式溢洪道的水流流态可以分为跌落流和滑行流两种流态。
- The thrust vectoring control tech has to be taken in if the post stall maneuver is controllable. 如果要实现可控的过失速机动，九必 须采用推理矢量控制。
- A polyphase flow numerical analog analysis has been made of the high pressure jet flow field, by way of CFD. 利用计算流体动力学(FD)方法对高压水射流流场进行了多相流的数值模拟分析。
- A polyphase flow numerical analog analysis has been made of the high pressure jet flow field,by way of CFD. 利用计算流体动力学(CFD)的方法对高压水射流流场进行了多相流的数值模拟分析。
