您要查找的是不是:
- Clean and degrease the surfaces of the shaft to be fitted to. Comply with the indicated tightening torque of screws (MT). 安装前必须把轴彻底清洁和除油;收紧锣栓(MT)时要参考上图所示的数据.
- Controlled tightening torque or force is another critical element with successful DISS connections. diss接头成功密封的的另一个关键因素是控制上紧的转矩或力。
- Always check the assembly drawing for confirmation as tightening torque values on the drawing takes precedence. 因为图纸上的拧紧扭矩值是居先的,始终要对组装图进行检查以达到确认。
- Aimed at the unreasoning practice of the tightening torque by manual when screwing on oil pump,a torque measure system is developed. 针对抽油泵螺纹旋紧扭矩由人工给出的不科学性,研制了抽油泵螺纹旋紧扭矩测控系统。
- The recommended tightening torque is 35 foot-pounds with a nickel DISS washer and 12 to 15 foot-pounds for a CTFE washer. 推荐的上紧转矩对于镍DISS垫圈是35英尺-磅,对于CTFE垫圈是12到15英尺-磅。
- Thus, torque wrenches should be used for tightening DISS connections. The recommended tightening torque is 35 foot-pounds with a nickel DISS washer and 12 to 15 foot-pounds for a CTFE washer. 因此,应该使用转矩扳手来上紧DISS接头。推荐的上紧转矩对于镍DISS垫圈是35英尺-磅,对于CTFE垫圈是12到15英尺-磅。
- The force and distortion of a new type locking rings unit were analyzed. The tightening torque and other performance figures were calculated, which provides theoretical basis for its proper usage. 对新型精轧机辊环锁紧装置进行了受力和变形分析,计算出它的拧紧力矩和相关性能指标,为正确使用提供了相关的理论依据。
- Abstract: This article studies the influence of the bolt tightening torque on the fretting damage of LY12CZ aluminium alloy doubleshear lap bolted joint by experimental and conumerical analysis. 摘 要: 从试验和数值分析两个方面研究了螺栓预紧力矩对LY12CZ铝合金双盖板对接螺纹联接件微动损伤的影响。
- Dimensions and recommended tightening torques are given in table 4. 尺寸与推荐的拧紧力矩都列在表4中。
- After proper operation has been verified, tighten all bolts using the crossover method. Recommended tightening torques pattern is listed below. 在检验操作能够正常进行后,在采用交叉法紧固所有螺栓。推荐的紧固扭矩模式如下所示。
- Turn the screw to the right to tighten it. 将螺钉向右旋紧。
- Bolt Tightening Torque of Main Component of Kinland 东风天龙新品重要部位的螺栓拧紧力矩
- Tighten adjustment screw to 3 N·m (30 in-lbs) torque. 拧紧调整螺丝到3 N·m (30 in-lbs)扭力。
- Tighten glass track nuts to 6 N·m (in-lbs) torque. 拧紧玻璃轨道螺帽至6 N·m (in-lbs)扭力。
- Tighten the cap bolts to the torque specified in the product data. 将座罩螺栓拧紧到产品数据规定的扭矩。
- He says he will take step to tighten up the administration. 他说他将采取措施加强行政管理。
- He said he would take steps to tighten up the administration. 他说他将采取措施加强行政管理。
- Because of unemployment many people had to tighten their belts. 由于失业,许多人不得不勒紧裤带生活。
- Recommended tightening torques for the cap bolts are provided with the product data. 推荐的座罩螺栓拧紧扭矩和产品数据一道提供。
- The sailors heaved at rope to tighten the sail. 水手们用力拉绳把帆绷紧。