您要查找的是不是：
- Pressure Seal Swing and Tilting Disc Check Valves. 节能梭式止回阀。
- Tilting Disc Check Valves Product Line. 翻转式阀瓣止回阀产品系列。
- The Pacific tilting disc check valve uses gravity to rapidly close the disc upon reversal of flow. 美国太平洋翻转式阀瓣止回阀在出现逆流时利用重力迅速关闭阀瓣。
- This tilting disc check valve is designed for high piping velocities, turbulence flow, quick and quiet closing preventing "water hammer". 这种翻转式阀瓣止回阀结构适用于管道流体流速很高,具有湍流,需要快速和安静关闭以防止“水锤”的场合。
- Tilting disc check valves are used to prevent reversal of flow in horizontal or vertical pipe lines. 翻转式阀瓣止回阀适用于防止水平或垂直管路上的流体倒流。
- Tilting Disc Check Valves consist of a cylindrical housing, with a pivoted circular disc. 翻转式阀瓣止回阀由圆柱形外壳及转动圆盘阀瓣构成。
- Typical Tilting Disc Check Valve 典型翻转式阀瓣止回阀
- Tilting Disc Check Valve Features 翻转式阀瓣止回阀特点
- Our Tilting Disc Check Valves are designed for quick opening and closing in severe service applications and the elimination of water hammer. 我们的翻转式阀瓣止回阀专用于在严酷的应用环境下迅速开启和关闭,避免出现水锤现象。
- Tilting Disc Check valves are similar to swing check valves. In most installations, slamming is minimized upon reversal of flow so noise and vibration are reduced. 翻转式阀瓣止回阀与旋启式止回阀类似。对于大多数安装的翻转式阀瓣止回阀,由于流体倒流造成的撞击程度最小,因此噪音和振动也有所减小。
- Tilting disc check valves have to close rapidly since the disc has a shorter distance to travel and therefore arrives at the seat faster...minimizing a slam. 翻转式阀瓣止回阀能够迅速关闭，这是由于阀瓣的运行距离很短，因此能够迅速到达阀座位置，从而最大限度减小撞击现象。
- Cast Steel Tilting Disc Check Valves 铸钢翻转式阀瓣止回阀
- Pressure Seal Tilting Disc Check Valves Forged Carbon, Alloy or Stainless Steel 螺栓阀帽翻转式止回阀锻造碳钢、合金钢或不锈钢
- Pressure Seal Swing and Tilting Disc Check Valves Forged Carbon, Alloy or Stainless Steel 压力密封旋启翻转阀瓣止回阀锻造碳钢、合金钢或不锈钢
- Flow coefficients at other than fully open may be approximated by use of the characteristic flow curves for tilting disc check and globe valves. 不是全开状态的流量系数可以采用适用于提升式阀瓣止回阀和截止阀的流量特性曲线进行估算。
- NOTE: Twin Disc Check Valves can be installed horizontally or in the vertical position with flow up. 注意:双阀瓣止回阀水平安装,或在流向朝上时垂直安装。
- This is especially true with slow response valves such as swing and titling disc check valves. 有些反应缓慢的阀门，如旋启式止回阀和翻转式阀瓣止回阀，经常会因此而损坏。
- Twin Disc Check Valves can be installed horizontally or in the vertical position with flow up. 双阀瓣止回阀可以安装在水平位置,或流向朝上的垂直位置。
- TILTING DISC CHECK DESIGN FEATURES 翻转式阀瓣止回阀结构特点
- Check valve guiding shall be plastic to plastic. 止回阀引导装置应该是塑料对塑料。
