您要查找的是不是:
- tool radius bias vector 刀具半径偏置矢量
- Whether the tool radius can be reasonably compensated is the key to improve machining quality and efficiency. 数控车床加工中能否对刀具半径进行合理补偿是提高零件加工质量和加工效率的关键。
- It describes the process of filleting contour in programming with the tool center track and tool radius compenstration. 在数控技能大赛中轮廓倒角和倒圆角的宏程序编制方法有两种:刀具中心轨迹编程和刀具半径补偿编程。
- The overcutting phenomena of tool radius compe ns ating,the means of settling such phenomena in programe were discussed in detail. 对刀具半径补偿中的过切现象进行了分析,重点讨论了在编程时解决这种现象的方法。
- In the CAM system,the cutting tool radius,the cutting tool radius compensation and the processing remainder remain extremely close and flexible. 在CAM系统中刀具半径、刀具半径补偿、加工余量之间的关系是非常密切和灵活的。
- This article introduces tool radius compensation in CNC milling process,and analyzes over-cutting reasons in using tool radius compensation. 介绍了数控铣床加工中的刀具半径补偿,分析了使用刀具半径补偿产生过切削现象的原因。
- Practice has proven tool radius compensation in the rough, finishing in the semi-fine and practical, and the size of precision machining parts, components can also be completed on the burr removal. 实践证明刀具半径补偿在粗、半精和精加工中切实可行,且符合零件加工尺寸精度要求,同时还可以完成零件上毛刺的清除。
- While wring tool radius eage to cut, it is complicated in the calculation oftool wear volume and tool wear length on its flank.However,the wear resistence of toolis mainly judged from them. 在刀具圆弧刃切削加工时,刀具的体积磨损量和后刀面磨损量的计算是一个复杂的球面三角问题,而这两个参数恰恰是衡量刀具耐磨损性能的重要指标。
- This thesis also compared the influence of different tool radii on LDR.The LDR increased as the punch radius and die radius become larger. 本文也比较不同冲模圆弧半径对LDR的改善,发现当冲头圆弧半径与冲模圆弧半径增加时,则极限引伸比将会增加。
- cutting tool radius compensation 刀具半径补偿
- The committee is of a/has a conservative bias. 委员会有一种保守的偏见。
- Keywords Tool radius compensating;Overcut;Program; 刀具半径补偿;过切;编程;
- He has a bias against Japanese products. 他讨厌日本的产品。
- compensation value of tool radius 刀具半径补偿值
- Histories are often warped by bias. 历史常为偏见所曲解。
- C function tool radius compensation C功能刀具半径补偿
- Some people have a bias against foreigners. 有些人对外国人有偏见。
- We can compute the circular area with radius. 我们能用半径计算出圆的面积。
- function B&C tool radius compensation B功能刀补
- The radius vector of each solid is always a positive length. 每个立体的矢径总是正值长度。