您要查找的是不是：
- total strain field 总应变场
- The total strain energy of laminated shell is deduced by means of Ritz method. 接着本文研 究了非对称正交层合壳的固化变形特性。
- The process by which the displacement field is calculated from a given strain field is quite lengthy. 从一个给定的应变场去计算位移场的过程是十分冗长的。
- The total strain can be calculated by summing up the increment of strain at each time. 研究中采用了广义开尔文体模型,总应变可由每个时刻应变增量的总和计算出来。
- A mathematical model for stretch/shrink flanging is developed based on the total strain theory and membrane assumption. 基于全量塑性理论及膜应变假设，导出了拉伸/收缩翻边数学模型。
- The inverse problem of finding the displacement field from a strain field is not so simple. 反过来，如果从变应场来寻找位移场，那么问题就没有这么简单。
- IMITATING COVARIANCE MATRIX OF DISPLACEMENT DATA AND ITS APPLICATION IN CALCULATION OF CRUSTAL STRAIN FIELD AS A WHOLE? 位移观测值协方差矩阵模拟及其在整体解算地壳应变场中的应用?
- The low-cycle fatigue behavior of the die cast Mg-7Al-0.5Y magnesium alloy has been investigated in case of full reversed total strain control mode. 研究了压铸态Mg-7Al-0.;5Y合金在全反向总应变模式控制下的低周疲劳行为。
- The fatigue cracks initiate and propagate both in a transgranular manner for all the total strain amplitudes under consideration. 碳化物可作为障碍,阻碍疲劳裂纹的扩展,且为主要的二次裂纹策源地;
- A tooth contact analysis model with a rotating freedom was developed by coupling freedom method to determine the stress and strain field of gears. 摘要利用自由度耦合方法建立了县有旋转自由度的齿轮接触模型，用以分析齿轮的应力应变场。
- In the analysis, the total strain amplitude as well as the rules of accumulative damage are used for the research of the fatigue life. 提出了一个用于计算非对称循环载荷下材料低周疲劳寿命的累积损伤模型和方法。
- In this paper,an ideal liquid model of s ym metrically colliding was taken to analyze the distribution character of natural strain field. 采用理想流体对称碰撞模型沿流线研究了驻点近区的自然应变分布规律。
- The asymptotic analysis of he stress and strain field at a propagating crack tip is given by means of an elastic-viscoplastic model. 摘要 本文采用一种弹性/粘塑性模型,对扩展裂纹尖端应力应变场进行了渐近分析。文中假定,弹性阶段的粘性效应可以略去,仅在塑性应变中粘性才起作用。
- The analytic formula of the feeding zone thickness distribution in hydroforming of variational cross-section tube is derived by using the total strain theory. 摘要通过力学分析和全量本构方程，推导出了变径管内高压成形送料区壁厚增厚的解析公式。
- The strain field ahead of a stationary crack tip with plane stress deformation in ductile metal was measured with SEM, by micro grid method and digital image processing. 用显微网格数字图系处理方法，测量了韧性材料平面应力条件下互型单边裂纹尖端附近的应变场。
- After an actual rolling process of 2050 mill was simulated by using the model, evolution laws of strain field, temperature field and microstructure were analyzed. 运用该模型对2050现场实际轧制过程进行模拟计算，分析了轧制过程轧件变形场、温度场及显微组织的演变规律。
- Closely related to the intraplate and surrounding tectonic settings, the spatial variation of the principal strain field of the PHIL is a reflection of the tectonic stress field. 菲律宾海板块主应变场的空间变化与板块内部及周围的构造背景密切相关,是构造应力场的反映。
- Based on the result of visioplasticity test,the law of tube central upsetting was created,and the calculated method of displacement field and strain field were obtained. 根据管坯视塑性实验法的实验结果,分析了无芯轴支撑条件下,管坯中部镦锻的变形规律,阐述了变形区位移场、应变场的计算方法;
- Stress field, strain field and the variation of thickness at different depth of drawing are obtained.Also the vectograph of node displacement is gotten. 通过对方盒形件拉深成形过程的模拟,得出了拉深不同深度的应力场、应变场分布以及厚度变化、节点位移矢量图;
- A total strain version of strain energy partitioning (TS-SEP) is formulated based on strain energy partitioning(SEP), utilizing the method of HALFORD and SALTSMAN for developing TS-SRP. 借鉴HALFORD和SALTSMAN发展总应变-应变范围区分法(TS-SRP)的经验,基于应变能区分法(SEP)建立总应变-应变能区分法(TS-SEP)。
