您要查找的是不是:
- traction drive belt 行走部分的传动皮带
- Generator drive belt condition and tension. 发电机传动皮带的状况和张力。
- Loose accessory drive belt (water pump slipping). 辅助驱动皮带松脱(水泵打滑)。
- The generator drive belt is loose or worn. 发动机传动皮带松动或腐蚀了。
- Remove serpentine drive belt, refer to Group Cooling. 拆下蛇型驱动皮带,请参阅单元7-冷却。
- Install accessary drive belt (refer to Group 7, Cooling). 安装附属的驱动皮带(请参阅单元7,冷却)。
- Worn main bearing from excessive tension on drive belt. 驱动轮上的轴承因张力过大而损坏。
- From then on a technical exercise, "traction drive technology" established in the leading position in the world. 从此经过技术的锻炼,在“牵引驱动技术领域”中确立了世界领先地位。
- Install the serpentine drive belt and tighten to obtain the specified tension. 安装蛇形驱动带,拧紧到规定的张力。
- ABB's scope of supply includes integrated traction drive and auxiliary power supply converters together with traction transformers. ABB供应的范围包括完整的牵引驱动,辅助电源变流器连同牵引变压器。
- A new symmetrically loading epicyclic traction drive reducer is introduced.It has advantage of high drive ratio of other epicyclic gears. 摘要介绍了一种新型对称加载行星牵引传动减速器,它保留了行星齿轮传动比大的优点。
- For belt tension specifications, refer to Specifications-Accessory Drive Belt in this group. 关于皮带张力规格表,请参见本单元的规格表-辅助驱动皮带
- Tighten all compressor mounting bolts, the clutch mounting nut, the clutch coil mounting screw or nut, and the serpentine drive belt to the correct specifications. 扭紧所有的压缩机固定螺栓、离合器固定螺帽、离合器线圈固定螺丝或螺帽和蛇型驱动皮带螺栓至正确规格。
- In this article,four key calculations for the traction drive lift: the calculations of the transmission,the traction force,the car frame and the gaide rail,are given,and they are checked. 给出了曳引驱动电梯设计的4个关键计算:包括传动、曳引力、轿厢架受力及导轨计算,并按电梯行业国家标准对计算进行了校核,结果表明:相关参数的选择是合理的,均满足了设计要求。
- Loosen the accessory drive belt tension and remove the belt from the power steering pump (refer to Group 07, Cooling Systems for proper procedures). 放松辅助驱动皮带,从动力转向泵上拆下皮带(有关程序,请参阅单元07,冷却系统)。
- A water-cooling system consists of the engine water jacket, thermostat, water pump, radiator, radiator cap, fan, fan drive belt and neccessary hoses. 一个完整的水冷系统包括机体水套,节温器,水泵,散热器,散热器罩,风扇,风扇驱动皮带和必需的水管。
- Drive belt and change gear to perform stabilized transmission of bottom weft and provide wider range of fabrics which be more superior in quality. 传动皮带使用高扭力时规皮带,齿轮搭配变速,纬底输送稳定,织物领域大且质量优良。
- A clutch engages and disengages the drive belt from the pedal crank, enabling the rider to filter the water while traveling or while stationary. 有一个可以控制在脚踏曲柄轴上传动带的传动器,使骑车的人在骑车移动或者静止的时候过滤水。
- Loosen the accessory drive belt at the power steering pump bracket, if equipped or at the idler pulley bracket (refer to Group 7, Cooling System for the proper procedure). 如果装备且在惰轮皮带盘托架上,放松动力转向泵托架上的附件驱动皮带。
- Design principle of High power Traction Drive CVT 大功率牵引传动CVT的设计原理