您要查找的是不是：
- transit switch selector 转接开关选择器
- Set the main switch selector to A (auto). 把主选择开关调至A(自动)。
- Set the main switch selector to the desired operation. 设置主选择开关在所需的操作状态。
- Set the main switch selector to A (auto) or M (manual). 把主选择开关转到A(自动)或M(手动)
- Set the main switch selector to A and set the mode dial to normal mode. 把主选择开关设置在A（自动）,同时把模式盘设置在普通模式。
- Main switch selector: Sets the camera to L (lock: power is turned off), and A (Auto), or M (Manual) operation. 主开关选择器:设置相机在L(锁定:电源断开),A(自动)或M(手动)操作。
- When then main switch selector is set to A (auto) or M (manual), the film will resume rewinding. 当主选择开关调至A(自动)或M(手动)时,又会恢复倒片
- The main switch selector, mode dial, up\down buttons, and a brief explanation of their functions are shown below. 以下说明主选择开关、模式盘、向上\\向下按钮以及解释它们的功能。
- To prevent unnecessary battery depletion. Set the main switch selector to L (lock) when you are not using the camera. 为避免不必要的电池耗电,当您不用相机时,请把主选择开关设定到L（锁定）。
- The main switch selector, mode dial, updown buttons, and a brief explanation of their functions are shown below. 以下说明主选择开关、模式盘、向上向下按钮以及解释它们的功能。
- To cancel AE lock before releasing the shutter, press the previewAE lock button again or set the main switch selector to L (lock) to turn off the power. 如要在快门释放前取消自动曝光锁定,请再次按压预景深自动曝光锁定按钮,或把主选择开光调到L,以断开电源。
- The following modes will be canceled when the main switch selector is set to L (lock) AE lock setting (in the previewAE lock user setting mode). Self-timer mode. 当主选择开关设置在（锁定）,以下的模式将被取消。自动曝光锁定设置（在预景深自动曝光锁定设置模式）,自拍模式。
- If the main switch selector is set to L (lock), the power will be completely cut off. The LCD panel and the viewfinder display will not operate. 如主选择开关设置在(锁定),电池将完全断开,液晶显示屏和取景器中的显示将消失。
- To cancel the multi exposure mode, turn the mode dial to select another mode, or set the main switch selector to L (lock) to turn off the power. 要取消多重曝光模式,可以转动模式盘到另一种模式,或把主选择开关调到L(锁定),断开电源。
- Set the main switch selector to M (manual). Make sure that the mode dial is set to either multi exposure, or normal mode. 把主选择开关调至M(手动)。保证模式盘调至多重曝光或者普通模式。
- If the main switch selector is set to L (lock), the power will be completely cut off.The LCD panel and the viewfinder display will not operate. 如主选择开关设置在（锁定）,电池将完全断开,液晶显示屏和取景器中的显示将消失。
- Set the main switch selector to M (manual). Make sure that the mode dial is set to either self-timer., multi exposure, auto bracketing, continuous shooting, or normal mode. 把主选择开关调至M（手动）。要保证模式盘调到自拍,多重拍摄,包围式曝光,连续拍摄或普通模式。
- international transit switching center 国际转接交换中心
- I groped for the light switch in the dark room. 我在黑暗的房间里摸索着找电灯开关。
- International Transit Switching Centre 国际转接交换中心
