您要查找的是不是：
- transmission shaft fork 传动轴节叉
- Resolution: the replacement of wear of the cardan shaft fork link for the ball. 处置办法：调换磨损的万向轴节叉及不断接球。
- The system includes main motor, main reduction gearbox, transmission shaft ect. 2机械传动系统包含有主电机，主减速箱、传动地轴等。
- Changing the cardan shaft fork, so that both sides of the mouth to form a flat schizaphis, generated new vibration sources. 在调换万向轴节叉时，给夺目使两脚的叉口成一立体，否则会爆发陈的波不静流。
- Sparated Bearing block for main transmission shaft Easy for maintenance and fix. 主传动轴承座可分拆结构;方便安装及维护.
- The three dimension mechanics model of transmission shaft was established based on CBR with parametric technology. 采用参数化式实例推理法建立了传动轴三维力学分析模型。
- Design the air pressure control on transmission shaft to not pollute the materials. 传动轴间设计空气压力，使操作不易产生污染或原料黑点。
- A special type vehicle's main transmission shaft of transmission equipments fractured during test-drive. 摘要某特种车辆在试车过程中传动装置主传动轴断裂失效。
- Based on the method to design the 3-D knottiness gimbale transmission shaft,the torsion vibration is reducde,and the syntony is also avoided. 按此法设计计算三维空间多节万向传动轴可减轻系统扭振及避免共振。
- The elastic deformation of the transmission shaft and the bearing, the drive of the mesh toughness, error and mesh impact were considered in the model. 模型中考虑了传动轴和轴承的弹性变形以及齿轮的啮合刚度激励、误差激励和啮合冲击激励。
- This paper presents the method determining the reasonable WOB by the thrusting force analysis of the bearing section of transmission shaft section. 通过对传动轴止推轴承的受力分析，提出了合理钻压的确定方法。
- Finally, the ternary complex is tried to use the proof of the rotation angle relation of the two transmission shaft in Hooke s universal joint. 在此过程中,提供了一种新型的推证万向节两传动轴转角关系的有效方法。
- The testing method using fall size substance specimens is introduced for transmission shaft, oil well pipe, train pothook, cover of sewer well. 介绍了传动轴、油井管、火车挂钩、窨井盖等全尺寸实体试件试验方法与工程实际应用情况。
- The fracture reasons of the transmission shaft were analyzed by means of chemical analysis,mechanical test,fractography and metallography examination. 通过检测化学成分、力学性能、宏观断口以及金相组织等方法对传动轴断裂原因进行了分析。
- The calculation method is useful to the design of high-speed jacquard machine transmission shaft and the analysis of other complex rotor system. 该分析计算方法对其他类型提花机主轴的设计及类似的复合转子系统的动态特性分析具有较好的参考价值。
- The gear and rack type bus redirector is consisted of a turning spindle and cylinder assembly, a transmission shaft assembly, and a redirector assembly. 齿轮齿条式汽车转向器是由“转向轴及柱管总成”、“转向传动轴总成”、“转向器总成”三大总成组成。
- The ZSJL Water Motor Alarm consists of a turbine shell, a vane wheel, a transmission shaft, a dabber, a rocker arm, a clapper, an alarm seat and a support shaft etc. ZSJL型穿墙水力警铃是由轮机壳体、叶轮、传动轴、芯轴、转臂、铃锤、警铃座、支撑轴等组成。
- A kind of Rotary cultivator shell, it includes shell with transmission shaft axis hole and set oil hole, set oil hole end has end cover , magnet is in this end cover . 一种旋耕机机壳，它包括带有传动轴轴孔及放油孔的壳体,放油孔端头设有端盖，在该端盖内设有磁铁。
- The breakdown of transmission shaft in the main drive system is due to too high roll torque.Overpower protection mode of motor current does not reflect the true dynamic character of roll torque. 轧制力矩过大是轧机主传动系统传动轴断裂的主要原因,传统的电机电流过载保护方式不能真实反映轧机主传动系统扭矩的动力学特性。
- In such a case, I lowered the rear wheels, dismounting the transmission shaft along with the gearbox.Then I took apart the clutch assembly, replacing the old clutch disk with a new one. 于是，把汽车的后轮放下来，拆下传动轴、变速器、再把离合器总成拆解下来，更换新的离合器摩擦片。
