该词条未找到_海词词典

您要查找的是不是：

A Rectangular Plate Bending Element Suitable for Transverse Shear Strain Deformation 一种考虑剪切变形影响的矩形板弯曲单元
transverse shearing strain 横向剪切应变
The shear strain can be determined in the following way. 用下列方法能够确定切应变。
Shear strain in MBE grown CdTe films on Si(211) substrates[J]. 引用该论文王元樟;陈路;巫艳;吴俊;于梅芳;方维政;何力.
The transformation is due to the shear strain imposed on the specimen by ECAP. 该转变发生是由于ECAP过程中材料承受剪切应变,应变能累积诱发再结晶,从而形成等轴晶双相结构。
After that, the double-wall grillage is simplified to an orthotropic plate with transverse shear deformation, w. 进而用减缩有效宽度作为双层板架中受压纵桁的带板宽度。
HY/PA can improve not only the transverse shear strength of CF/PA but also the longitudinal shear strength of KF/PA. 另外,HY/PA在改善CF/PA的横向剪切强度的同时,也改善了芳纶纤维增强尼龙复合材料(KF/PA)的纵向剪切强度;
The effect of diffusion controlled interfacial sliding on the transverse shear deformation of fibrous composites is studied. 研究了扩散控制的界面滑动对纤维复合材料的横向剪切变形行为的影响。
The only strain is a shear strain and the dilatation is zero, these waves are called shear waves. 唯一的应变是剪应变而没有膨胀，这种波叫剪切波。
Reddy J.N:.:Free vibration of antisymmetric angle-ply laminatd plates including transverse shear deformation by the finite element method[J]. 林敦祥;倪荣根.;预测纤维增强复合材料层压板固有频率振型及模态阻尼的有限元算法[J]
Good bonds are always accompanied by surface extension, that is, plastic shear strain. 良好的键合总伴有表面延伸即塑性切向形变。
The influence of transverse shear, centerline extensibility as well as rotary inertia on the natural frequencies of a circular beam are also studied. 数值算例表明，本方法稳定收敛、精度较高，对圆弧曲梁问题简单、有效。
Variation of Damping Properties Under Magnetic Field and Shear Strain Amplitude in Fe-Cr-Al Alloys. 高阻尼Fe-Cr-Al合金在磁场和应力场下的阻尼行为
The differential quadrature method for free vibration of orthotropic plates in consideration of the effects of higher-order transverse shear deformations is presented. 分析了计及高阶横向剪切变形的正交各向异性弹性板自由振动的问题。
In this paper, axisymmetric nonlinear dynamic equations of fiber reinforced symmetric cross-ply laminated flat spherical shells are found including transverse shear deformation. 本文建立了考虑横向剪切影响、纤维增强对称正交铺设层合扁球壳的非线性动力方程。
The elasticity of copolyester increases with the shear strain but decreases with the temperature. 弹性随切应力的增大而增大,随温度的升高而降低。
The interlaminar transverse shear stresses are the main factor, which leads to the delamination of laminated plate in the lower free vibration frequencies. 在低阶模态振动下，横向剪应力是造成层合板脱层的主要原因;
The residual strain is the additional shear strain created with the increase of pore pressure due to cyclic shear under initial shear stress. 残余应变是由于周期剪切引起孔隙压力增长;在初始剪力作用下产生的附加的剪应变.
The results show that the data of shear strain 2 are reliable because the component 2 and 4 of shear strainmeter work normally. 通过对标定系数和滞后时间的分析认为：元件2、4工作状况比较稳定，观测值差应变2是比较可靠的；
Moreover, high value region of maximum shear strain and superficial expansion in this area is in Tianjing, Beijing, Tangshan area. 区内最大剪应变、面膨胀的高值区在天津、北京、唐山一带。