您要查找的是不是：
- tube heating time 电子管加热时间
- Sampling tube heating time 采样管加热时间
- Diangong Heat tube Vacuum tube heat collector. 电工太阳能热管真空管集热器.
- Diangong Solar vacuum tube heat collector. 电工太阳能真空管集热器.
- It can also get the same result by raising the tube billet's heating temperature and prolonging its heating time. 适当提高管坯加热温度和延长加热时间，均能显著减少穿孔毛管的外折缺陷，提高金属收得率。
- The shell and cover of the radiation tube heating furnace. 辐射管加热炉的炉壳及炉盖
- Cracking cause analysis of the U shaped tube heat exchangers. U形管换热器开裂原因分析
- Besides,the EPM of MA737 cancer cell was decreased with prolongation of heating time. 研究还发现，MA737癌细胞的热敏性比相应的正常细胞强，随高温受热时间的延长，癌细胞的EPM呈下降趋势。
- Minimum heating time is over 50% less than that of traditional vacuum drying oven. 最短加热时间，与传统真空干燥箱相比加热时间减少50%25以上。
- HMT relates to temperature difference between inner and outer face of pipe,heating time,wide of heating wire,etc. 该方法处理的优劣,与内外壁面温度差、加热时间、线圈宽度、最大加热温度等因素有关。
- It discusses the influence of carrying airflow,heating time,heating temperature and gap on analyzing water content. 讨论载气流量、加热时间、加热温度及空白对水含量分析的影响;
- The result show that ascend angle infection factor during spirally tube heat transfer should not be neglected. 试验结果表明,螺旋升角在螺旋槽管凝结换热过程中具有不可忽视的影响。
- The optimized conditions of soda-AQ are: alkali charge 22%, dosage of AQ 0.1%, the maximum temperature 165oC and heating time 90min. 烧碱蒽醌法最佳蒸煮条件是:用碱量22%25;蒽醌用量0.;1%25;最高温度165°C;保温时间90min。
- The chemical plant recycles benzene from gas with tube heating furnace distillation process, 5600 tons of crude benzol can be recycled per year . 化产分厂回收煤气中的苯，用管式炉加热蒸馏法富油中的苯的工艺流程，年回收粗笨5600吨。
- Influence of the heating time,microwave power and material weight on the decomposing ratio of ammonium molybdate was investigated. 实验结果表明:微波可以快速煅烧钼酸铵获得高纯三氧化钼;
- The results demonstrate that the temperature of the microheater increases with the increase of heating time and becomes unchangeable in the end. 结果表明,微加热器温度随加热时间的延长而升高并最终达到稳定值;
- To design an optimum shell and tube heat exchanger, there are many variables including pressure, diameter, length and baffle spacing, resulting in a very complex problem. 要设计一个最佳化的管壳式换热器，包含许多变量，如压力、直径、长度和折流板间距,结果使问题非常复杂。
- Accurate prediction of slab heating time in-furnace in process control computer system of walking beam furnace for hot rolling is studied. 摘要主要研究在热轧步进式加热炉过程控制计算机系统中，如何准确预测板坯在炉加热时间。
- The heat transfer and flow resistance performance of corrugated tube heat exchanger were examined by oil, water, and steam. 采用油、水、水蒸气对波纹管换热器的传热和流动阻力性能进行了试验研究。
- The temperature distribution of glass plate must be solved simultaneously with roller's temperature field which varies with heating time. 传动辊温度随加热时间而改变,在计算玻璃板温度时,必须与传动辊的温度场耦合求解。
