您要查找的是不是:
- The Development of a Volute Cell for Turbine Blade Cooling Effect Test Rig 涡轮叶片冷效试验专用蜗壳舱研制
- Numerical analysis of heat transfer in typical turbine blade cooling configuration of ribbed passage and pin fin arrays 涡轮叶片尾缘复合冷却通道换热的数值模拟
- turbine blade cooling 涡轮叶片冷却
- Wuxi Turbine Blade Works Co., Ltd. 无锡透平叶片有限公司。
- Sophisticate cooling techniques must be employed to ensure that the turbine blade metal temperature is kept at an allowable level. 为保障工作叶片安全可靠的工作,必须采取有效的冷却措施。
- Measurements of heat transfer and pressure drop in the short pin fin array used in trail cooling channel of turbine blade have been performed. 采用放大的模型对装有五排短扰流柱的涡轮叶片尾缘的冷却通道的流阻特性及通道端壁表面上的局部换热系数进行了测量,重点研究了扰流柱直径及形状的影响。
- Measurements of heat transfer and pressure drop in the short pin-fin array used in trail cooling channel of turbine blade have been performed. 采用放大的模型对装有五排短扰流柱的涡轮叶片尾缘的冷却通道的流阻特性及通道端壁表面上的局部换热系数进行了测量,重点研究了扰流柱直径及形状的影响。
- Investigation of local heat transfer characteristics near film cooling holes about inner side of turbine blade midchord area with impingement was carried out experimentally. 摘要对叶片弦中区内部“冲击-气膜出流”冷却方式中气膜孔附近壁面的换热特性进行了实验研究。
- Numerical investigation for local heat transfer characteristics of the inner side of turbine blade near film cooling holes, whether there is impingement or no has been carried out with an RSM turbulence model. 摘要用RSM模型对有、无冲击气膜出流冷气侧气膜孔局部换热特性进行了数值研究。
- KEY WORDS Anisotropic, Constitutive model, Viscoplastic, Turbine blade. 关键词:正交异性,本构模型,粘塑性,涡轮叶片
- Check no damage for fan blades and turbine blades. 检查风扇叶片和涡轮叶片无损坏迹象。
- Check no damage for fan blades and turbine blades . 检查风扇叶片和涡轮叶片无损坏迹象。
- The wall thickness of the hollow aeroengine turbine blade is a critical parameter for ensuring its strength. 航空发动机空心涡轮叶片的壁厚是保证叶片强度的一个关键参数。
- An example of rabbet feature manufacturability of a turbine blade was given to show the method available. 最后以涡轮叶片榫头特征的可制造性分析为应用实例,说明该方法的有效性和实用性。
- This paper presents the scheme of a versatile robot for on-site repair of hydraulic turbine blade. 介绍了一种多功能的水轮机叶片坑内修复机器人方案和研究进展。
- This steam is used to turn turbine blades of electric generators. 这蒸汽被用来推动发电机的涡轮叶片。
- The RE-aluminizing technique and coating structure of gas turbine blade made of alloy M38G are studied. 研究了涡轮叶片材料M38G合金渗稀土-铝涂层的工艺过程和组织结构。
- PREDICTION OF FILM COOLING FOR TURBINE BLADE 涡轮叶片气膜冷却的数值模拟
- Clogging up of the cooling air slits in the turbine blades is primarily caused by ultrafine particles with a high specific surface area. 涡轮叶片之间冷却空气缝隙的堵塞主要是因为存在高比表面积的超细粒子。
- Full-Scale Structural Testing of Wind Turbine Blades TS Ed. 风力发电机组叶片满量程试验。