您要查找的是不是：
- Deformation of preloaded soft ground was calculated with the Yin's double yield surface model, the viscoelastic-viscoplastic model and the viscoelastic-viscoplastic damage model respectively. 结合堆载预压加固软基实例，分别采用殷宗泽双屈服面模型、粘弹-粘塑性和粘弹-粘塑性损伤模型进行有限元分析。
- Modified Two Yield Surface Constitutive Model for Finite Element Analysis of Deep Excavation 适于基坑开挖分析的一个改进双屈服面模型
- ellipse-parabola double yield surface model 椭圆-抛物双屈服面模型
- Single yield surface model of soil and its application in pile-soil interaction 土的单屈服面模型及在桩土作用中的应用研究
- Influences of double yield surface model parameters on calculated settlement of core type rockfill dam 双屈服面模型参数对心墙堆石坝计算沉降的影响
- Dynamic visco-plastic memorial nested yield surface model of soil and its verification 土体动力粘塑性记忆型嵌套面本构模型及其验证
- double yield surface model 双屈服面模型
- The difference between two yields is commonly called the'spread'. 两者差距一般称为利差。
- Considering the anisotropic behaviour of natural clay the new constitutive model employs an inclined ellipse as the yield surface, no longer the aclinic ellipse used in traditional modified Cam-clay. 由此，本文首先根据天然软粘土的屈服性状，将修正剑桥模型各向同性的屈服面改进为各向异性的椭圆屈服面；
- In this paper, the multi-potential surface model and Duncan-Chang?s E-m model are compared in plain strain cases, in which the same parameters are assumed for the two models. 在这篇论文中,利用所开发的有限元程序NM02就平面应变情况对多重势面模型和邓肯-张m-E模型计算成果进行对比分析,其中多重势面模型参数与m-E模型参数完全相同。
- The influence of yield surface shape on limit thickness strain can be represented by the P-valueproposed by Barlat,in which the effects of Rand Mare included. 屈服表面形状对极限厚度应变的影响;可以用Barlat 提出的包含了R 和M 影响的p 值表示出来.
- The rende-ring process included two stages: water surface modeling and illumination simulation. 该渲染过程分为两个阶段,即水面建模和光照实现。
- The experimental study shows that the yield surface radius descreases with increasing the cyclic number under the specific strain amplitude and decreases with the incre... 循环背应力幅值随单调应变而减小;随循环塑性应变幅值增大而增大.
- The images will be zoomed in by interpolatory subdivision and no intermediate continuous surface model should be established. 该算法无须建立中间连续图像模型，能自适应地插值，而且插值系数可为任意正实数。
- Considering the die-cavity roughing being a 2.5D cutting, a novel cutting force surface model is created based on orthogonal cutting tests. 鉴于模具型腔粗加工常采用2.;5维加工，提出一种通过正交切削试验建立切削力曲面模型用于模具型腔粗加工进给率优选的新策略。
- The two systems of government are polar opposites. 这两种政体正好相反。
- As a new method to map the outer cortex of the human brain, a deformable surface model is described in this paper. 探讨了大脑表面形态提取的一种新方法可变形表面模型。
- The business is owned by two partners. 这家商行为两名合伙人所拥有。
- The exporting of the surface model in standard form is completed with DXF standard form. 利用DXF文件格式完成了曲面标准格式输出。
- The result mainly shows that: the larger the offset strain is defined the more the subsequent yield surface will expand in the direction no preloading and the less the vertex phenomena will present. 若采用平移应变法确定屈服应力，平移应变取值越大，后继屈服面在非预加载方向扩张越大且后继屈服尖点现象越不明显。
