您要查找的是不是：
- vacuum arc melting process 真空电弧熔化法
- Base on this, in this work we prepared in situ TiC or (TiB+TiC)/Ti-1100 composites with various volume fraction of reinforcements by the consumable vacuum arc melting. 主要研究结果如下:在所制备的原位自生(TiB+TiC)或TiC/ Ti-1100复合材料中,增强体TiB、TiC分布均匀,与基体界面洁净,没有明显反应层存在。
- vacuum arc melting 真空电弧熔炼
- vacuum arc melting furnace 真空电弧熔炼炉
- The substance or quantity of a substance produced by a melting process. 熔解量一熔解过程所产生之物质或其质量
- Vacuum arc furnace is an important equipment for melting refractory alloys and active metals, which plays an important role in the preparation of special materials. 真空电弧炉是熔炼难熔合金和活性金属的重要设备,对许多工业领域的特种材料的制备起着重要的作用。
- Based on detailed analysis of heat transfer of electric arc and scrap melting process, an integrated model was estab-lished. 在详细地分析了电弧传热和废钢熔化过程的基础上,建立了完整的废钢熔化过程数学模型。
- This article briefly introduces the study that pure alkali - melting process treats the vacuum dezincing furnace slag and comprehensively recovers Ge, In, Ag, Pb and Zn from it. 简要介绍了碱熔法处理真空炉渣,综合回收锗、铟、银、铅、锌有价金属的试验研究。
- The ash melting process is a key process for dioxins zero emission. 其中，灰渣的熔融处理是限制二恶英零排放的重要步骤。
- Using vacuum - induction meting plus vacuum consumable electrode double melting process, the ingot with low- gas conntent and fine homogeneous distribution low inclusion content can be obtained. 采用真空感应熔炼十二次真空自耗重熔工艺,可获得低气体、夹杂含量低并细小均匀分布的钢锭。
- The effect of second anode action on the cathode vacuum arc discharge stability in the cathode arc deposition technology is studied. 研究了阴极弧等离子体沉积中第二阳极现象改善弧放电稳定性的作用。
- Considering the deficiency of measurement in the melting process, an RBF neural network method is developed to predict the end-point carbon content in the vacuum induction furnace. 摘要针对冶炼过程中碳含量不能直接测定的不足，采用RBF神经网络对真空感应炉的终点碳含量进行预报。
- The oxidation of Zr(Fe,Cr)_2 with different Fe/Cr ratio prepared by non-consumable arc melting is carried out in air at 773K and 973K. 用非自耗电弧炉熔炼了比值(重量比值)不同的Zr(Fe,Cr)_2,并在773K和973K的空气中氧化。
- Arc slag remelting (ASR) of the ESR absorption and the advantages of vacuum arc remelting. 弧渣重熔（ASR）吸收了电渣重熔和真空电弧重熔的优点。
- Boxman, R. L., Sanders D., Martin P. J., Handbook of Vacuum Arc Science and Technology,(1995). 林建宏，磁控溅射沈积铬基硬质镀膜高温氧化与机械性质研究，中兴大学硕士论文，(1998)。
- The premelting behavior of small copper clusters in the melting process[J]. 引用该论文 詹仪;丁峰;李新乡;王广厚.
- TiC reinforced titanium matrix composites were simply produced at low cost by non consumable arc melting technology utilizing the reaction between titanium and graphite. 利用钛与碳之间的反应 ;经非自耗电弧熔炼工艺 ;简洁、低成本地制备了 Ti C增强的钛基复合材料 .
- Direct current metal filtered cathodic vacuum arc(FCVA) and acetylene gas(C_2H_2) are wielded to synthesize amorphous carbon films on Si(100). 采用直流金属磁过滤阴极真空弧(FCVA)制造出Ti和乙炔(C2H2)气体的双等离子体在单晶硅(100)上制备非晶态碳膜.
- LIANG Shu-hua, FAN Zhi-kang, HU Rui.Microstructure and properties of CuCr series pseudobinary alloy by arc melting[J].Special Casting &Nonferrous Alloys, 2004,4(25):25-27. [4]梁淑华;范志康;胡锐.;电弧熔炼法制造CuCr触头材料的组织与性能[J]
- The forces applied on the molten pool at the cathode surface under the action of an ex-ternal magnetic field during vacuum arc coating are analyzed. 分析了在外加磁场作用下，真空电弧镀膜中阴极靶面液池的受力情况，导出了液滴喷溅特性受磁场影响的关系式。
