您要查找的是不是：
- Stellite takes a high polish and is used in steel valve seat rings. 钨铬钴合金具有很高的抛光度，用作钢阀门的阀座环。
- Dual Grease Injector at Seat Ring and Wedge of Gate Valve. 闸阀的阀座环和楔形闸板上的双重润滑油注入器。
- Grease Injector at Seat Ring and Disc of Globe Valve. 截止阀的阀座环和阀瓣上的润滑油注入器。
- valve seat ring 气门座圈
- Clean or replace the relief valve seat. 清洗或更换安全阀阀座。
- Seat ring is seal welded to eliminate leak path. 阀座环通过焊接密封,消除泄漏通道。
- Damage or fouled relief valve seat. 安全阀阀座损坏或受到污染。
- Damaged or fouled relief valve seat. 安全阀阀座受到损坏或污染。
- Trim numbers with H have cobalt alloy hardfaced seat ring facing. 带有H的阀内件型号具有钴合金硬面阀座环表面。
- Place the relief valve seat back into the chamber bore. 将安全阀阀座放回到镗孔内。
- Slide the diaphragm assembly into the relief valve seat. 将隔膜总成滑进到安全阀阀座内。
- Lift check valve module straight out, taking care not to hit and damage seat ring. 直接将止回阀模块取出,小心不要碰到和损坏阀座环。
- Remove the pressed in relief valve seat and seat O-ring. 拆卸压进去的安全阀阀座和阀座O形环。
- The body side seat has a rib molded into the seat ring which locks into a groove in the valve body. 阀体侧面阀座有模铸肋条，镶嵌在阀座环内，并将阀座锁定在阀体凹槽内。
- The maximum differential pressure across the valve seat. 通过阀门阀座的最大压差。
- Quick replaceable valve seat, convenient maintenance. 阀座可以快换，维修方便。
- Seat ring is progressively crimped on a lathe to imprison the O-ring in it. 在机床上,阀座密封环逐渐起波纹,并将O形环束缚在里面。
- Replaceable, resilient crimped seat rings. 可更换，弹性波纹阀座环。
- The stainless steel seat ring is manufactured with a slight inside taper. 不锈钢阀座密封环制成内部锥度。
- Special extra width, monel seat ring allows for wear without loss of seal. 特别超宽蒙乃尔密封环，经得起磨损而不会丧失密封性能。
