您要查找的是不是：
- Install a dial indicator so plunger contacts valve spring retainer as nearly perpendicular as possiblZero the indicator. 安装一个表盘式指示器，使柱塞与气门弹簧护圈尽可能垂直。将指示器调零。
- Remove valve spring and retainer. 拆卸阀弹簧和扣件。
- CAUTION: The check valve spring is in compression. 警告：止回阀弹簧处于压缩状态。
- Features a modular design concept which facilitates complete maintenance and assembly by retaining the spring load. First and second check valve spring modules are not interchangeable. 特点在于模块设计概念,通过保持弹簧负载促使日常维护和总成的完善。第一和第二止回阀弹簧模块不能互换。
- For removal of valve stem seal and lower valve spring guide. 可用于拆卸汽门油封或降低汽门弹簧。
- lock valve spring retainer 气阀弹簧锁头
- diaphragm valve spring retainer 膜片阀弹簧压盖
- valve spring retainer 气门弹簧座
- valve spring retainer clamp 气门弹簧座锁片
- valve spring retainer key 阀簧底座销
- valve spring retainer lock 气门弹簧锁销
- The spring retainers are not to be removed for servicing. 弹簧固定器不能被拆卸维修。
- Due to the release of pressure when removing the cover, the relief valve spring may eject quickly. 因为在拆卸阀盖时松开压力，安全阀弹簧可能会快速弹出来。
- The spring load is captured by the two spring retainers and the stem. 通过两个弹簧固定器和阀杆可以恢复弹簧负载。
- Multi - purposed optimal design of reliability for valve spring based on fuzzy method. 基于模糊学方法的气门弹簧可靠性多目标优化设计。
- Remove the relief valve cover, stem/diaphragm assembly, and relief valve spring. 拆卸安全阀阀盖，阀杆/隔膜总成，和安全阀弹簧。
- Remove the spring retainer and spring. Note that the large diameter of the spring is down on the guide assembly. 拆卸弹簧固定器和弹簧。注意在引导总成上弹簧的直径有所减少。
- Check whether or not the fuel injection pump plunger and fuel outlet valve is worn or clogged, plunger spring and fuel outlet valve spring is broke. 喷油泵柱塞及出油阀是否磨损或卡死、柱塞弹簧及出油阀弹簧是否折断；
- Then, pneumatic valve spring made from this spring steel wire have been treated by this investigation of liquid tufftriding process. 然后 ,用以对此规格的钢丝制造的气阀弹簧进行了低温液体软氮化处理。
- Kit consists of: Seat, Seat O-ring, Disc assembly, Spring, Spring retainer, Check Cage and Cover O-ring. 组件包括:阀座,阀座O形环,阀瓣总成,弹簧,弹簧保持器,止回笼和阀盖O形环。
