您要查找的是不是：
- Progress on Surface Antigens of Brucella spp. 布鲁氏菌表面抗原研究进展。
- Fixative spray Protective spray used on surface of artwork. 固定喷剂喷在正稿面上的保护喷剂。
- Apply is on surface of work desk and move work place etc. 适用于工作台及移动工作场所。
- Fixative spray: Protective spray used on surface of artwork. 固定喷剂:喷在正稿面上的保护喷剂。
- The Sketch on Surface button did not work. This is fixed. 修正"在曲面上描绘"按钮无法执行指令的错误。
- Objective:To evaluate the effects of endostatin adenoviral vector on malignant ascites. 目的:探讨内皮抑素基因治疗在癌性腹水中的治疗作用。
- Measurement on surface profile of aspherical liquid micro-lens[J]. 引用该论文 何建慧;詹珍贤;吴云良;王克逸.
- The acoustic radiation resistance matrix is combined with the velocity vector on a vibration surface to predict the total sound power radiated from the structure. 摘要利用声辐射阻力矩阵和振动面上的速度矢量预报了结构声辐射的总功率。
- Light streaks on surface of flow are traces of highly reflective flakes. 流动表面上的亮条纹是高度反光的薄片的轨迹线。
- This paper introduces the study of styrene acrylic emulsion on surface sizing. 对苯乙烯/烯酸乳液在表面施胶中的作用进行了研究。
- Can be cperated on surface or remoted, as well as the operation of two-place. 可在箱面操作或远程操作,也可两地操作。
- Degrease the surface properly before painting. Remove rust layer on surface. 涂装前适当清洁表面。清除锈迹。
- Hao Cunjiang, Professor, devoted to the research on surface chemistry. 郝存江,教授,主要从事界面化学研究。
- The degradative effect on surface was examined by SEM and XPS(ESCA). 通过扫描电镜(SEM)和光电子能谱(XPS)表征材料表面降解情况。
- In this paper, the method of iteration weighting adjustment is applied to deal with the displacement vector on the top of a dam. 本文采用送代位移权平差方法求取大坝坝顶变形监测点的位移向量。
- The shell is made of good quality stainless steel, baking finish on surface. 外壳采用优质薄钢板，表面烘漆。
- Light streaks on surface of flow are traces of highly reflective flakes . 流动表面上的亮条纹是高度反光的薄片的轨迹线。
- These methods put the onus of finding the memorization vector on users and also leave it up to users to realize that they need to find it in the first place. 这些方法将找到记忆途径的责任推给用户，用户只能靠自己意识到他们首先需要找到记忆途径。
- It is applied sanding refinedly on surface of resin,plastic and metal panel. 适用与树酯、塑料及金属板材的定厚及表面精砂。
- For drill point with planar flanks, using toolroom microscope, we measure the angles relevant to unit vector on the flanks and transform these data into design parameters. 我们利用工具显微镜,对平面型后刀面枪钻测量有关的角度,确定后刀面法矢方向,并将数据转换为设计参数。
