您要查找的是不是：
- vibration damping mechanism 减振机构
- In the laser this damping mechanism can be visualized as follows. 在激光器中，这种阻尼机理可以如下理解。
- It is found that the vibration damping performemce of the graft copolymer was affected by the amount of PVMS. 大分子硅单体的加入大大改善了丙烯酸酯共聚物的低温阻尼性能,而引发剂用量对共聚物的阻尼性能影响较小。
- Pull vibration damper off of the crankshaft. 将减震器从曲轴上拉下。
- Inspect/replace the vibration damper. 检视/更换减震器。
- The text is mainly about the damping mechanism of polymer base piezoelectricity intellectual damping materials. 摘要综述了聚合物基压电智能阻尼材料的阻尼机理。
- This Tungsten part is not only a counterweight, but is also vibration damping and thereby improving the audio quality. 录音机音质微调钮含有钨平衡块，该钨块，还能防震从而改进机器质量。
- H.S. Yan and J.J. Chen, "Creative design of a wheel damping mechanism," Mechanism and Machine Theory, Vol.20, No.6, pp.597-600, 1985. 陈照忠，平面机构之类型合成，硕士论文，国立成功大学机械工程研究所，台南，1982年，5月。
- The main damping mechanism before critical temperature was dislocation movement and after that was grain boundary gliding. 随着测试温度的升高，合金的阻尼值升高，在临界温度之前以位错阻尼机制为主，当温度超过临界温度则以晶界滑动为主要阻尼机制。
- According to the function mechanisms, polymeric noise reduction composites were classified as vibration damping, sound absorption and sound insulation materials. 降噪材料按降噪机理可分为阻尼减振材料、声材料和隔声材料。
- Cures at room temperature to a transparent gel, The cured gel state provides excellent mechanical cushioning and vibration damping for delicate electronic assemblies. 室温固化成透明凝胶,固化后的凝胶对于精密电子组件有着良好的机械缓冲和减振作用,且具有低温性能。
- An ACM/CIIR/PZT/CB composite material was prepared.At the same time, the damping behaviors were characterized and the damping mechanism of the materials was primarily explored. 制备了CIIR/ACM/PZT/CB复合材料,通过测试该材料的振动衰减时间对其阻尼性能进行了表征,并探讨了材料不同的电阻与其阻尼性能的关系。
- Remove vibration damper bolt and washer from end of crankshaft. 从曲轴端拆下减震器螺栓和垫圈。
- The vibration damping steel sheet(VDSS) laminated by steel sheets and polymer is a new type of material which has quickly developed at home and abroad in recent years. 由钢板和高分子材料复合制得的减振钢板是近年来国内外迅速发展的新型材料,具有显著的减振、降噪的作用,是振动、噪声场合替代纯金属板材的理想环保产品。
- Chein-Jie,Tung, Tzu-Chien Hsu. Vibration damping with urethane/acrylate simultaneous semi-interpenetrating polymer networks[J]. J Appl Polym Sci,1992,46(10):1759-1773. 秦川丽;蔡俊;张巨生;等.;宽温域高阻尼互穿聚合物网络材料的结构与性能研究[J]
- The results of simulation and prototype test indicated that the designing theory of the multi-DOF vibration damping platform is correct and appropriate. 样机仿真和试验分析结果表明，两平移两转动多自由度减振平台设计理论和分析方法是正确可行的。
- This paper introduce the processing techniques, vibration damping characteristics, for mability, durability weldability and applications of the laminated steel sheet. 本文论述了此材料的制造方法,减振性能,成形性能,耐久性能,焊接性能及其用途。
- Ball mills are the main source of noise pollution in power plants.Noise isolation hoods are most suitable for noise absorption, vibration damping and sound isolation. 钢球磨煤机噪声是电厂的主要噪声源之一,采用隔声罩能发挥吸声、减振、隔声的作用。
- Remove vibration damper (refer to vibration damper removal in this section). 拆卸减震器（请参阅本节中的减震器拆卸）。
- Basing on the theory of polymer mechanical damping mechanism, damping behavior evaluation and considering the influence factors of damping property, the adv... 最后笔者简述了互穿网络聚合物与金属两端钉扎弦阻尼共振型有内在机理方面的联系。
