您要查找的是不是：
- DC Voltage reference element 直流电压基准
- voltage reference element 电压参考元件
- Use the reference element to specify a data source. 使用reference元素指定数据源。
- The Reference element specifies an individual reference. Reference元素指定单个引用。
- Design of a CMOS Band-Gap Voltage Reference with Low Drift of Temperature. 刘小杰。一种低温漂CMOS带隙基准电压源的设计。
- ReferenceElementRequired At least one Reference element is required. 至少应该有一个引用节点。
- A novel super performance CMOS voltage reference circuit was designed based on the theory of bandgap voltage reference. 介绍了带隙基准电压源的基本原理,设计了一种高精度带隙基准电压源电路。
- The power supply voltage may be controlled by replacing D1, D2, R1 and R2 with a variable voltage reference. 将D1、D2、R1和R2换成一个可变参考电压源，本电路就变成了一个可控电源。
- NIST will keep a customer's Zener voltage reference for just more than two weeks. NIST会保有客户的齐纳电压参考2周多一点。
- In this stage, the subtractor rejects the 5V common-mode signal from the voltage reference. 这个阶段，减法器抵消了电压参考的5V共模信号。
- The minimum number of times the reference element type can occur on the element. 引用元素类型在元素上可以出现的最小次数。
- If the reference element has a phase of zero, compute the phase applied to element five when the beam is scanned 40o above the boresight axis. 如果参考单元的相位是零，计算第五单元当扫描视轴线以上40度的相位。
- In addition, this thesis designs a 1-V bandgap voltage reference with temperature compensation to suit the current of low supply voltage. 另外并针对未来低压的趋势考量，设计一个1伏输入电压，并具有曲率补偿功能的能阶差参考电压电路，以符合未来电路的需求。
- This paper proposes a bias circuit for cascode current mirror in band-gap voltage reference to realize low supply voltage. 通过设计带隙基准电压源中共源共栅电流镜的偏置电路以实现低电源电压工作。
- Choose the reference element as the top most element and the farthest right element when looking from the antenna along the boresight axis. 选择参考单元在从天线眼视轴线向前视角方向的最右上角。
- Let's see... We have an op-amp, a couple of transistors, a voltage reference, and a few resistors. Can we build a linear regulator from these individual components? Yes, we can! 看看。。假如我们有一个运放，一些电阻，一个参考电压源以及一些晶体管，我们是否可以制作一个线性稳压电源？答案是肯定的！
- The most important parameters for data acquisition systems design are initial error, output voltage temperature coefficient (TC), thermal hysteresis, noise, and long-term stability of the voltage reference device. 对数据采集系统设计最重要的参数是器件的初始误差、输出电压温度系数、热迟滞系数、输出电压噪声、长期稳定度。
- Standard cells are electrochemical cells used as voltage references in many electrical standards laboratories. 标准电池是很多电学标准实验室用作电压参考标准的电化学电池。
- Thus, when positioning the beam to the same side of the boresight axis as the reference element, each array element must lead the next element closer to the reference by the same amount, >0. 这样，当使波束指向与参考单元在视轴线的同侧，每个阵列单元必须超前次后接近参考单元一个等大的值，大于0。
- Sims uses those setups mostly to calibrate Zener voltage references, but she also calibrates voltage standard cells. Sims大多使用那些设备来校准齐纳电压参考，也校准电压标准单元。
