您要查找的是不是:
- water pump shaft gear 水泵轴齿轮
- The engine fan is usually mounted on the water pump shaft and is driven by the same belt that drives the pump and the generator. 发动机风扇通常安装在水泵轴上,由驱动水泵和发电机的同一条皮带驱动。
- The fan is usually mounted on an extension of the water pump shaft and is driven by V-belt from a pulley mounted on the front end of the cramshaft. 风扇常常装在水泵轴的伸出物上,由安装在曲轴前段的滑轮上的v带驱动。
- Main parts and components of the water pump include: water pump seat, water pump body, water pump shaft, impeller, belt pulley, water seal and bearing encase Figure 31 for its structure. 水泵主要零部件有:水泵座、水泵体、水泵轴、叶轮、皮带轮、水封及轴承等。其结构见图31。
- oil pump shaft gear 油泵轴齿轮
- water pump shaft 水泵轴
- water pump shaft bearing 水泵轴轴承
- water pump shaft slinger 水泵轴抛油环
- water pump shaft spacer 水泵轴隔套
- Anne took Helen to the water pump in the yard. 安妮把海伦带到院子的抽水机旁。
- Loose accessory drive belt (water pump slipping). 辅助驱动皮带松脱(水泵打滑)。
- Chemical analysis and metallograph examination were used to analyze the quenching cracking of shaft gear. 运用化学分析、金相检验等方法,对45钢制轴齿轮产生的裂纹进行检测分析。
- Connect radiator lower hose to water pump. 连接散热器下部软管至水泵。
- Apply to all typse of vehicles after the bridge ,and the manual transm-ission drive shaft gear lubrication . 适用于各类汽车的后桥,传动轴和手动变速箱齿轮的润滑。
- Ms. Cathy: about our sample of water pump? 关于我们水泵的样品?
- Switch the water pump from A to B. 把水泵从泵切换到泵。
- The demolition of the impeller and pump shaft when the first fixed, loose nut or screw rotation device linked to the first, and then moving thimble screw rotation, gradually pulled out gear. 拆卸时先把叶轮和泵轴固定,松开螺帽或转动装置挂头螺丝,再旋动顶针螺杆,逐渐将传动装置拉出。
- TIANJIN AUTOMOBILE WATER PUMP CO., LTD. 天津汽车水泵有限公司。
- Taizhou Yuxuan Automobile Water Pump Co., Ltd. 台州玉旋汽车水泵有限公司。
- Forward extruding for hollow pinion gear, compound extruding for housing gear and upending extruding for shaft gear and their forming conditions and processes were analyzed. 介绍了带孔小齿轮的正挤压直接成形、带壳小齿轮的复合挤压成形和带轴齿轮的镦挤成形等传统冷挤压方法,以及上述各类齿轮的冷挤压成形条件和工作过程。