您要查找的是不是:
- water inlet manifold 进水总管
- Cylinder liner water inlet low pressure slow-down. 缸套水入口压力低降速。
- Install a shut-off valve in the cold water inlet line. 在冷水进水管处安装一个关闭阀。
- An expansion of unburnt gases in the exhaust system or a premature explosion in a cylinder or inlet manifold. 在排气系统未燃烧尽的气体的爆炸,或者在汽缸或进气管道的过早爆炸。
- Install a shutoff valve in the cold water inlet line. 在冷水进水管处安装一个关闭阀。
- In order to producte qualified inlet manifold casting, top gating system with lip riser and shell core made of precoated sand is used. 为了获得合格的进气歧管铸件,采用压边顶铸浇注系统和覆膜砂壳芯制作工艺。
- A new casting technology for inlet manifold in tilt casting machine for gravity die casting was described. 介绍了在可倾式金属型浇注机上制造进气歧管的铸造新工艺。
- Install a vacuum relief anti-siphon device in the cold water inlet line. 在冷水进水管上安装一个反虹吸的真空安全法。
- Turn off water supply at the shut off valve in the cold water inlet. 关闭冷水进水阀门来关闭水供应。
- Close the cold water inlet valve and open a nearby hot water faucet. 关闭冷水进水阀,打开附近的热水水龙头。
- The hot water outlet and cold water inlet are identified on the back panel of the heater. 这种类型热水器的热水出水口和冷水进水口位于热水器的面板后部。
- The Urinal flush valve is able to be connected with top or rear water inlet urinal ceramics. 吉博力小便冲洗阀可与上进水或后进水的小便器相连。
- Overpressure to the Inlet Manifold 进口多头导管超压
- Disconnect water piping connections to the cold water inlet and the hot water outlet. Disengage the heater from the wall bracket. 在冷水和热水接口处拆下水管。从墙支架上拆除热水器。
- The discharge capacity of grate opening as rain water inlet directly affects the drainage capac-ity of the highway. 雨水口篦子泄水量是雨水口泄水能力好坏的关键因素 ,其设置的好坏直接影响道路路面排水效果。
- After soldering, flush piping and install valve using filter washer on hot and cold water inlet and fiber washer on the mixed water outlet. 焊接后,冲洗管道,随后采用热水和冷水进口处的过滤器垫圈和混合水出口处的纤维垫圈安装阀门。
- The hydraulically-operated thermostat opens a spring loaded check in the cold water inlet allowing cold water to mix with the hot water. 水压控制的温度调节装置在冷水进口处开启弹簧加压的止回阀,让冷水进入与热水混合。
- Can all glass vacuum collector tube operate with water inletting? 全玻璃真空集热管不能顶水运行吗?
- If the drain hose does not have this rating, open the cold water inlet valve and open a nearby hot water faucet until water is no longer hot. 如果排水软管的额定温度没有达到上述要求,请打开冷水进水阀,打开附近的热水水龙头,直到水不热为止。
- Mould Manufacturing for Inlet Manifold Based on Rapid Prototyping 基于快速原型技术的进气歧管模具制造