您要查找的是不是：
- working steam pressure 工作汽压
- The piston moves by steam pressure. 活塞在蒸汽压力下运动。
- Steam pressure exploded the boiler. 蒸气的压力使锅炉爆炸了。
- The piston moves by steam pressure . 活塞在蒸汽压力下运动。
- The changes of steam pressure and temperature canont influence the trap.It sas good working characteristic. 该阀不受蒸汽压力、温度变化的影响，具有良好的工作特性。
- The steam pressure falls on account of condensation in the cylinder. 由于汽缸里的冷凝作用，蒸汽的压力降低了。
- Working steam engines had been on the job for decades before Watt ever saw one. 事实上，能够有效运转的蒸汽机早在瓦特能够看到这种东西之前的几十年就已经存在并且工作了。
- The steam pressure in the bother is slightly higher than it should be. 锅炉内的蒸汽压力比应有的压力略高。
- He smiled and stood before a bar with a shining steam pressure coffee machine. 他含笑站在一个酒吧前，那儿有架闪光的蒸汽压咖啡机。
- The parameters of the working steam were not stable and the disposition capacities were variable in operation. 在实际生产运行中,工作蒸汽的参数是不稳定的,而且处理量也是变化的。
- When tube wall strength can not bear inner steam pressure in the tube, blowout of low-temperature tube occurs. 当管壁强度无法承受管内蒸汽压力时，导致低温过热器管爆裂。
- Irrespective of disconnection of a fan, control of the exhaust steam pressure, must be maintained. 必须保持风机不被无端的断开，排气压力在控制之下。
- It would not be influenced by the vibration, fluctuating steam pressure, and the water hammer. 不受震动、蒸汽压力波动和水锤的影响。
- It would not be influenced by the vibration,fluctuating steam pressure,and the water hammer. 不受震动、蒸汽压力波动和水锤的影响。
- Any pneumatic or steam pressure testing allowed should be carried out when the minimum number of personnel are around. 任何经允许的气动或蒸汽压力测试均应限制在场人员数量至最少所需时进行。
- One effective way of achieving increased thermal efficiency is to increase steam pressure. 实现提高热效率的一个有效途径就是增加蒸汽压力。
- The Steam Pressure Escape Valve shouldst be closed only when thou dost clean the mechanism. 只有当你是清理机器的时候才能关闭蒸气压力释放阀门。
- The gold tailing can be used to produce high quality brick by steam pressure curing technology. 利用黄金尾砂和生石灰，采用蒸压养护工艺，可生产出高质量的砌筑砖。
- It is necessary to raise steam pressure to open safety valve automatically as to examine its sensitiveness. 9必要时可使气压提高将安全阀自动顶开，以检查其灵敏性。
- Pneumatic and steam pressure testing must be carried out under the direct supervision of an Authorised Engineer. 气动和蒸汽压力测试必须在授权工程师的直接监督下进行。
