您要查找的是不是:
- ANALYSIS ON FLOW PERFORMANCES OF COMPOSITE WICK AND WORKING FLUID CHARACTERISTICS FOR CPL CPL复合毛细芯流动性能及工质特性分析
- Using tap water as working fluid. 使用自来水当工作液。
- The experimental study on characteristics of a swirl pressure nozzle was carried out with the water as the working fluid of atomization. 实验结果为旋流压力式雾化器的工业化设计提供了重要的实验依据。
- However, the research on torque characteristics, working fluid, two-phase flow of LVC hasn"t been quite mature at present. 但是目前对于液体粘性联轴器的转矩特性、工作流体特性以及硅油/空气的两相流体流动与传热特性的研究,并不十分成熟。
- The electrical and energetic characteristics of AMTEC with potassium working fluid (K-AMTEC) are calculated and compared with those of AMTEC with sodium working fluid (Na-AMTEC). 对钾工质碱金属热电直接发电器件(K-AMTEC)的电特性和力能特性进行了分析计算,并与采用钠工质的碱金属热电直接发电器件(Na-AMTEC)进行了比较。
- The cooling mechanism and some basic characteristics of the system, such as entrainment ratio, coefficient of performance (COP) were analyzed. These system characteristics in use of R22 and water respectively as a working fluid were calculated. 描述了其工作原理 ;讨论了关于喷射系数和系统性能系数COP的计算方法 ;分别采用R2 2和水为制冷工质 ;进行多次计算取得最大喷射系数 ;并对系统性能系数COP作了定量的计算 .
- The fluid characteristics suggests the multi-stage superimposition of fluid and sharp cahnge of temperature. 成矿流体特征指示成矿机制为多期流体叠加,流体成分及温度发生过剧变。
- The atomization characteristics of different eddy pressure nozzles were investigated using FAM laser particle size analyzer with water as working fluid in different pressure conditions. 利用FAM激光粒度测量仪,以水为工质对不同结构旋涡压力喷嘴在不同压力条件下的雾化特性进行了实验研究。
- The characteristics of flow-versus-condensing pressure in electronic expansion valve (EEV) with R410A, a new environment-friendly refrigerant as working fluid were experimentally investigated. 摘要以新型环保制冷剂R410A为工质,实验研究了电子膨胀阀的流量随冷凝压力的变化规律。
- Optimum analyzer system will be applied for specified point, considering the fluid characteristics, measured components and purpose of measuring. 在规定的测量点,考虑到流体特性、被测组份及测量目的,应采用最适宜的分析系统。
- The characteristics of flow-versus-condensing pressure in electronic expansion valve(EEV)with R410A,a new environment-friendly refrigerant as working fluid were experimentally investigated. 以新型环保制冷剂R410A为工质,实验研究了电子膨胀阀的流量随冷凝压力的变化规律。
- This paper reveals how to make use of these parameters to discover oil showing and identify fluid characteristics of r... 利用这些参数可发现储集层中不同性质的油显示及对储集层流体性质进行评价。
- Metal Working Fluids and Related Materials, Classification for (05. 金属工作液和相关材料的分类(05。
- This paper studied a CDG system (colloidal dispersion gels) of HPAM/ AlCit, based on formation characteristics and formation fluid characteristics of Daqing oilfield. 本文根据大庆油田实际的地质、油层流体性质特征,研究了HPAM/AlCit胶态分散凝胶体系。
- For on-line calibration system of flowmeter, the working fluid flow is from the petroleum pipe line itself. 体积管工作时的液流,对于流量计在线检定系统,是来自输油管线本身;
- By the processing experiment under the different machine parameters, the influence of the abrasive fluid characteristics on the processing results is further validated. 通过在不同机器参数下对工件的研磨实验,进一步验证了物料运动特征对加工效果影响的分析结果。
- A CPL is designed and fabricated, and its working fluid charging system is designed and made as well. 本文实际制作了CPL系统,分析了在制作过程中的要点。
- Liposome has similar lipid bilayer structure and fluid characteristics to real cell membrane, and plays an important role in mimetic biomembrane research. 摘要脂质体具有与细胞膜相似的封闭双层结构,是接近天然生物膜的理想模型。
- The abnormal flow and heat transfer disciplinarian of the working fluid in CPL induce the CPL non-steady-operation. 诱发CPL不稳定性运行的因素是CPL管内流动和传热的异常变化规律。
- Liposome has similar lipid bilayer structure and fluid characteristics to real cell membrane,and plays an important role in mimetic biomembrane research. 脂质体具有与细胞膜相似的封闭双层结构,是接近天然生物膜的理想模型。