您要查找的是不是:
- A Fire Zone Model Method for Solving Narrow Space 狭长空间火灾区域模型研究
- zone model method 区域模型方法
- About cohesive zone model, you can find them in Needleman's paper. 尤其是裂纹怎样萌生。
- Key words:energy consumptions per GDP ;decompose model ;method abstraction. 一、“十一五”期间单位GDP能耗降低20%25,那么平均每年降低率是多少?
- A blend zone model for excimer laser refractive surgery is presented.Firstly, a blend function is designed. 摘要提出了一种在准分子镭射眼屈光手术中过渡区模型的构造方法。
- Then a new modeling method is brought forward to build the digitized TBM's damage zone based on interpolation. 先确定出垂直杀伤区的边界,然后确定水平杀伤区边界,并进行修正,近似地确定出杀伤区。
- Second it studies the theories of L-system and simply introduces OpenGL and model method based on images of organs. 论文的主体部分对用到的L 系统的理论进行了研究以及对OpenGL 图形库技术和基于器官的图像的建模方法进行了简单的介绍;
- In this paper, an evaluation model is set up by utilizing statistical linear regression model method. 摘要本论文利用统计中的线性回归模型的方法建立了评价模型。
- A novel modeling method integrated KPCA with RVM was proposed. 摘要提出了一种核主元分析(KPCA)和关联向量机(RVM)相结合的组合建模方法。
- Based on two-layer zone model, the mathematical model of atria smoke management system, including smoke filling, gravity venting and smoke exhaust, was developed. 论文以两层区域模型为基础,对中庭烟气填充,自然排烟,机械排烟过程分别建立了数学模型;
- The modeling method of AR online is sim-ple and practical. 最后给出了船舶纵摇运动预报结果并与实船纵摇运动进行了比较。
- Index method was relatively simple and practicable,and model method had obvious logicality and system. 指数法计算方法较简单、实用;模型法具有较强的逻辑性和系统性;
- This paper put forward a equivalent model method about ship electric net emulating. 针对船舶电网的仿真,提出了一种等效模型的仿真方法。
- The accuracies under twotypes of elements are discussed and model method of the same structure is presented. 根据计算结果,讨论了种单元的计算精度。提出了类似结构的建模方法。
- Under the assumption of the constant temperature, pressure, smoke concentration within each layer and by using conservation of mass, energy, components and the state equation of the ideal gas, a multi-layer zone model is introduced. 通过假定每个水平控制层内的物理参数(如温度、压强、烟气浓度等)为均匀分布,并运用质量守恒原理、能量守恒原理、组分守恒方程以及理想气体状态方程,建立了一个可以获得火灾发展过程中温度和浓度垂向分布的多层区域模型。
- The hidden corbel is analyzed with strut-and-tie model method and shear-friction theory, and corresponding design formulas are deduced. 应用拉压杆模型方法和剪力摩擦理论对暗牛腿进行分析,推导出其承载力公式,并提出相应的设计建议。
- A component prototype modeling method based on semantics was suggested. 提出了一种基于语义的组件化样机建模方法。
- This paper uses the cost model method to introduce the iteration algorithm of monobasic high power equation which is convenient to use . 结合成本模型法,介绍一元高次方程的迭代解法,便于有关人员采用。
- So Object Modeling method are more fit for distributary channel modeling. 因此得到,目标体模拟方法更适合三角洲分流河道的岩相建模。
- An example is given to illustrate the computerization of this modeling method. 并结合实例分析了该装配模型的计算机实现方法。