您要查找的是不是:
- The analog data path between the connector and the analog? to? digital converter in the analog input subsystem. 在模拟输入子系统中,模数转换器与连接器之间的模拟数字信道。
- The region controller is designed modularly, which is constituted of CPU module, digital input module (DI), digital output module (DO), analog input module (AI). 区域控制器采用模块化设计,由CPU模块、数字量输出模块(DO模块)、数字量输入模块(DI模块)、模拟量输入模块(AI模块)构成。
- Listing 3. Call to input converter WCUSTI w-inbound-conversion. 清单3.
- Let us compare our unknown analog input signal to a "guess". 现将一个未知的模拟输入信号同一个假定值进行比较。
- The analog input signal is latched on the rising edge of CLK. 模拟输入信号在CLK的上升沿被锁存。
- For analog inputs, any absolute voltage value above which the analog-to- digital converter cannot distinguish a change. The overload value can be different for plus and minus inputs. 就模拟输入而言,使模数转换器不能区别其变化的超范围的绝对电压值。超载值对于正输入和负输入可能不同。
- Figure 7 shows the equivalent circuit of the analog input section. 图7显示模拟输入部件的等效的电路。
- ADS7864 is 12-bit,6-channel analog input A/D converter by Burr-Brown. Its inner structure, operation mode and the key of programming are introduced. In addition,application of ADS7864 in the harmonic analyzer and its interface with DSP are also presented. ADS7864是Burr-Brown公司开发的12位6通道A/D转换器,介绍了ADS7864的工作原理、内部结构、工作模式及编程要点,给出了ADS7864在电网谐波分析仪中与数字信号处理器TMS320F206的接口应用实例,并且对DSP与A/D转换器的接口特点进行了总结。
- In analog input channel, the combination software filter is applied to obtain more credible data as possible, and median voting circuit module is adopted in output channel to gain accurate outputs. 在模拟输入通道中采用中位值滤波和递推平均滤波的组合算法,来获取尽可能可靠的输入数据,在模拟输出通道中则采用中值表决电路通用模块实现正确的模拟输出。
- The hardware, software configuration and principle of A/D converter module are also introduced. 详细介绍了A/D转换模块的软硬件结构与原理。
- A physical file containing the COBOL driver program, input converter, and output converter. 它是一包含COBOL驱动程序、输入转换器以及输出转换器的物理文件。
- The principle, features and main technical performances of a CAMAC charge digital converter module are discribed in the paper. 本文介绍了一种CAMAC电荷数字转换器的原理、特点和主要技术性能。
- In this paper, a new structure of Coordinate Convert Module in Digital Down Converter is presented which is based on CORDIC algorithm. 本文介绍了一种基于CORDIC算法的数字下变频器(DDC)中坐标变换模块的结构以及该结构的ASIC实现。
- Device where analog output variable is equal to the sum, or a weighted sum, of two or more analog input variables. 一种装置,其模拟输出变量等于两个或多个模拟输入变量的和或加权和。
- Dual Encoder to USB Converter module can handle signals from 2 SSI absolute encoders or 2 quadrature incremental encoders. 双编码USB转换模块可以处理的信号2小型工业绝对式编码器或2正交增量编码器。
- The application and maintenance of single phase input converter DV700T1500 produced by Panasonic in improving multitool dicing machine are described. 主要介绍松下公司生产的DV700T1500型单相输入的变频器在多刀切割机改进中的应用及其维护保养措施。
- The port RA2 was sampled by AD convert module and the result was stored in the work register, and then it was compared with preset value. 若采样结果低于设定值,使单片机输出端口输出低电平,控制背光灯亮;
- The Program PLC's Analog Input Module 可编程序控制器模拟量输入模块的程序设计方法
- Using a 1-bit internal ADC, the internal converter modulator in Figure 1 samples the input signal, producing a coarse, quantized output. 使用1位内部ADC,图1中内部转换调节器采集输入信号,产生粗量化的输出作为输入信号。
- The high level analog input is attenuated before being applied to the same modulator. 经过衰减的高电平信号也可加在同一调制器。