您要查找的是不是：
- Combustion engine driven arc welding set 内燃机驱动式弧焊机
- Motor driven arc welding set 电动机驱动式弧焊机
- arc welding set 电弧焊机组
- single operator arc welding set 单人电焊机
- The harmonious control idea of the short circuiting transfer of the CO2 shielded arc welding is put forward in this paper，and its control system is set up. 提出了CO2气体保护焊短路过渡的和谐控制思想，并建立了相应的控制系统。
- Abstract: The harmonious control idea of the short circuiting transfer of the CO2 shielded arc welding is put forward in this paper，and its control system is set up. 文摘:提出了CO2气体保护焊短路过渡的和谐控制思想，并建立了相应的控制系统。
- For Automatic Welding-Electric Arc welding goggles and ccd imaging system. 用于自动变光电焊焊接护目镜以及看焊缝的ccd成像系统。
- Corrosion resistance and high strength. Argon arc welding of aluminum alloys. 耐蚀,强度高。铝合金氩弧焊用。
- Wear resistance. Argon arc welding of copper alloys and surfacing of steel. 耐磨性好。铜合金氩弧焊及钢的堆焊用。
- A CAD system of AC arc welding transformers called AWVTCAD was studied. 本文对交流弧焊变压器的计算机辅助设计系统进行了研究，简称“AWVTCAD”，结果表明利用该系统对弧焊变压器设计，不仅能提高计算精度与速度，而且也减轻了设计者的劳动强度及降低设计成本。
- It is perfectphase trigger circuit for arc welding power source of scr. 该相控触发电路是晶闸管整流弧焊电源的理想触发电路。
- Perhaps I need to pull apart another SCR and try the arc welding approach. 也许我需要把除了另一可控硅和审判电弧焊接的办法。
- Use manual metalic arc welding, the type of electrod is A102 for material 304. 设备采用手工电弧焊，304材质焊条牌号为A102。
- Arc brazing has the characteristics of braze welding and arc welding. 电弧钎焊是近十年来才发展起来的一种新型硬钎焊工艺，兼有钎焊和电弧焊的特点。
- Such as electric arc welding, carbon dioxide gas shielded arc welding, TIG etc. 如：电弧焊、二氧化碳气体保护焊、氩弧焊等各种焊接。
- The problems of the peculiarities of arc welding and the estimation of weld quality are discussed. 主要考虑了弧焊特性的提取以及焊接质量的估计。
- The etched section also reveals that multiple weld passes were made over the top of the original submerged arc weld pass. 从酸蚀断面还可以看出：在原自动埋弧焊的上面覆盖有多层焊道。
- Re-melding in Ar arc welding of camshaft is particular heat treatment for hardening. 凸轮轴氩弧重新熔化硬化是一独特的热处理方式。
- Good corrosion resistance, weldability and ductility. Gas welding and argon arc welding of aluminum alloys. 良好的耐蚀性、可焊性及塑性。铝合金气焊、氩弧焊用。
- Good ductility and corrosion resistance. Gas welding and argon arc welding of pure aluminum. 塑性好、耐蚀。纯铝气焊、氩弧焊用。
